ET48 Option Parts

 
1 - 120 of 121 items
Sort By:
Assassin body (clear) for Tekno ET48-ET48.3 Fin, 1/8th Serrated Light-weight Wheel Nut Black
Assassin body (clear) for Tekno ET48-ET48.3Fin, 1/8th Serrated Light-weight Wheel Nut Black

Assassin body (clear) for Tekno ET48-ET48.3

When competitive racing hits the boiling point, everyone reaches for light-weight items. JConcepts has the answer with the introduction of the Fin styled light-weight 17mm fine thread wheel nut set. These high precision wheel nuts are flanged and...

$31.99

$29.99

$30.00

$25.98

Fin, 1/8th Serrated Light-weight Wheel Nut Blue FRC Custom Tekno ET48-ET48.3 Chassis Protector
Fin, 1/8th Serrated Light-weight Wheel Nut BlueFRC Custom Tekno ET48-ET48.3 Chassis Protector
When competitive racing hits the boiling point, everyone reaches for light-weight items. JConcepts has the answer with the introduction of the Fin styled light-weight 17mm fine thread wheel nut set. These high precision wheel nuts are flanged and...

 Buy two or more they are $15.99ea These are 18 MIL custom chassis protectors that will fit the Tekno ET48-ET48.3. These protectors were used and put to the ultimate test at...

$30.00

$25.98

$19.99

$17.98

(1)
Illuzion - 1/8th Wheel Nuts (fine thread) Black Illuzion - 1/8th Wheel Nuts (fine thread) Blue
Illuzion - 1/8th Wheel Nuts (fine thread) BlackIlluzion - 1/8th Wheel Nuts (fine thread) Blue

JConcepts has your 1/8th buggy or truck, locking wheel nut needs covered with the 17mm fine thread capped wheel nut set. These high precision wheel nuts are flanged and knurled for locking security and feature a closed end to protect from dirt...

JConcepts has your 1/8th buggy or truck, locking wheel nut needs covered with the 17mm fine thread capped wheel nut set. These high precision wheel nuts are flanged and knurled for locking security and feature a closed end to protect from dirt...

$22.00

$18.99

$22.00

$18.99

SCT410/3/EB/NB/ET/NT48 & SL V2 aluminum hinge pin brace kit Tekno ET48 to ET48.3 Basic upgrade kit
SCT410/3/EB/NB/ET/NT48 & SL V2 aluminum hinge pin brace kitTekno ET48 to ET48.3 Basic upgrade kit

  This is a V2 adjustable hinge pin brace kit. Can be used on the SCT410, SCT410.3, EB/NB/ET/NT48 and SL. Heres what you get. TKR5161 – V2 Adjustable Hinge Pin Brace “A” block, 7075 CNC,...

This is a Tekno ET48 to ET48.3 basic upgrade kit. It includes 1x TKR5166 – Front Bumper (revised, EB/NB/ET/NT) 1x TKR5181 – Low Profile Wing Mount & Body Mounts (SL/EB/NB/ET/NT) 1x TKR5187 – Rod Ends (straight, 6.8mm,...

$109.95

$79.99

(1)

$156.00

$98.99

TKR1103 – Turnbuckle Wrench (4mm, 5mm, hardened steel) TKR1115 – Pivot Ball and Shock Multi-tool (aluminum)
TKR1103 – Turnbuckle Wrench (4mm, 5mm, hardened steel)TKR1115 – Pivot Ball and Shock Multi-tool (aluminum)

TKR1103 – Turnbuckle Wrench (4mm, 5mm, hardened steel) How do you improve on a simple turnbuckle wrench? The current crop of aluminum turnbuckle wrenches just aren’t cutting it in terms of durability. They wear out easily and are...

TKR1115 – Multi-Purpose Shock/Ball End Tool (shock shafts, shock caps, ball ends) Our new innovative shock/ball end tool is going to change the way you look at working on your RC vehicle. It incorporates many extremely useful features into...

$14.99

$12.29

(1)

$39.99

$33.99

(1)
TKR1116 – 17mm Wheel Wrench, Shock Cap Tool TKR1119 – Wrench (5.5mm / 7.0mm, hardened steel)
TKR1116 – 17mm Wheel Wrench, Shock Cap ToolTKR1119 – Wrench (5.5mm / 7.0mm, hardened steel)

TKR1116 – 17mm Wheel Wrench, Shock Cap Tool We are proud to put our own spin on the wheel wrench (no pun intended). Our unique handle design is comfortable in the hand and provides much more leverage versus traditional designs. This is...

TKR1119 – Wrench (5.5mm / 7.0mm, hardened steel) The Tekno RC tool product line is expanding. This dual ended tool is perfect for any application requiring a 5.5mm (M3 nut) or 7mm (M4 nut) wrench. It is compact and extremely durable so it...

$29.99

$24.99

$14.99

$12.29

TKR1121 – Pit Mat (Tekno RC logo, dark blue, 2’x4′) TKR1220 – M3 Countersunk Washers (aluminum, natural, 10pcs)
TKR1121 – Pit Mat (Tekno RC logo, dark blue, 2’x4′)TKR1220 – M3 Countersunk Washers (aluminum, natural, 10pcs)

TKR1121 – Pit Mat (Tekno RC logo, dark blue, 2’x4′)

TKR1220 – M3 Countersunk Washers (aluminum, natural, 10pcs)

$24.99

$20.98

(1)

$7.99

$6.59

TKR1228 – M4 Countersunk Washers (black anodized, 10pcs) TKR1238 – Droop Adjustment Screws (M4x10mm, 8pcs)
TKR1228 – M4 Countersunk Washers (black anodized, 10pcs)TKR1238 – Droop Adjustment Screws (M4x10mm, 8pcs)

TKR1228 – M4 Countersunk Washers (black anodized, 10pcs)

TKR1238 – Droop Adjustment Screws (M4x10mm, 8pcs) Our new droop screws makes it a breeze to set droop on your vehicle. A 2.0 hex is machined on the shank end for easy adjustment and a normal 2.5mm hex is on the button head. They are...

$7.99

$6.59

$7.99

$6.59

TKR1250 – Steering Link Screws (black, steel, 2pcs) TKR1403 – M3x10mm Button Head Screws (black, 10pcs)
TKR1250 – Steering Link Screws (black, steel, 2pcs)TKR1403 – M3x10mm Button Head Screws (black, 10pcs)

Product Description

TKR1250 – Steering Link Screws (black, steel, 2pcs)

Product Description

TKR1403 – M3x10mm Button Head Screws (black, 10pcs)

These screws are for the new stamped ackermann plate (TKR8100).

$2.99

$2.69

$3.99

$3.59

TKR1605 – M3x10mm Set Screws (black, 10pcs) TKR1609 – M3x3mm Set Screws (black, 10pcs)
TKR1605 – M3x10mm Set Screws (black, 10pcs)TKR1609 – M3x3mm Set Screws (black, 10pcs)

TKR1605 – M3x10mm Set Screws (black, 10pcs)

These are used to secure the locking spring perch and rod ends (TKR6140) and can also be used anywhere an M3x10mm set screw is required.

TKR1609 – M3x3mm Set Screws (black, 10pcs) These are used on the following products: TKR5571M – 12mm clamping hexes TKR5199A – CNC rear hubs for EB/NB/ET/NT48 TKR5336B – NB/NT throttle linkage

$3.99

$3.49

$3.99

$3.49

TKR4175 – M5 Pinion Gear (15t, MOD1, 5mm bore, M5 set screw) TKR4176 – M5 Pinion Gear (16t, MOD1, 5mm bore, M5 set screw)
TKR4175 – M5 Pinion Gear (15t, MOD1, 5mm bore, M5 set screw)TKR4176 – M5 Pinion Gear (16t, MOD1, 5mm bore, M5 set screw)

The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or...

The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or...

$11.99

$9.99

$11.99

$9.99

TKR4177 – M5 Pinion Gear (17t, MOD1, 5mm bore, M5 set screw) TKR4178 – M5 Pinion Gear (18t, MOD1, 5mm bore, M5 set screw)
TKR4177 – M5 Pinion Gear (17t, MOD1, 5mm bore, M5 set screw)TKR4178 – M5 Pinion Gear (18t, MOD1, 5mm bore, M5 set screw)

Product Description The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear...

The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or...

$11.99

$9.99

$11.99

$9.99

TKR4179 – M5 Pinion Gear (19t, MOD1, 5mm bore, M5 set screw) TKR4180 – M5 Pinion Gear (20t, MOD1, 5mm bore, M5 set screw)
TKR4179 – M5 Pinion Gear (19t, MOD1, 5mm bore, M5 set screw)TKR4180 – M5 Pinion Gear (20t, MOD1, 5mm bore, M5 set screw)

The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or...

The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or...

$11.99

$9.99

$11.99

$9.99

TKR4215 – Clutch Bell (15t, NB48) TKR5013C – Adjustable Hinge Pin Brace (rear outer, LRC -1.0, toe
TKR4215 – Clutch Bell (15t, NB48)TKR5013C – Adjustable Hinge Pin Brace (rear outer, LRC -1.0, toe

TKR4215 – Clutch Bell (15t, NB48)

TKR5013C – Adjustable Hinge Pin Brace (rear outer, LRC -1.0, toe -1.0, 7075 CNC, gun metal anodized, EB/NB/ET/NT/SCT) After extensive testing and support from our customers we have designed a new rear hinge pin brace that produces a lower...

$19.99

$16.39

$24.99

$14.98

TKR5018 – Front Bumper TKR5042 – Spindle Carriers (10 degrees caster, left and right)
TKR5018 – Front BumperTKR5042 – Spindle Carriers (10 degrees caster, left and right)

TKR5018 – Front Bumper

TKR5042 – Spindle Carriers (10 degrees caster, left and right) *Combined with the chassis kick up and ability to adjust that angle with the front inner hinge pin inserts, the total caster on the vehicles can be adjusted from 20 deg (single...

$5.99

$4.99

$13.99

$11.49

TKR5060C – Steering Servo Brace (carbon fiber) TKR5070A – Stub Axles (aluminum, 2pcs)
TKR5060C – Steering Servo Brace (carbon fiber)TKR5070A – Stub Axles (aluminum, 2pcs)

TKR5060C – Steering Servo Brace (carbon fiber)

The Tekno RC Aluminum Stub Axles are designed to reduce rotating mass as well as unsprung weight without sacrificing strength or durability. After undergoing several months of race proven testing, they meet our high...

$14.99

$12.29

$24.99

$21.99

TKR5071B – Wheel Hubs (17mm, lightened, aluminum, gun metal ano, TKR5071C – Wheel Hubs (17mm, lightened, aluminum, gun metal ano,
TKR5071B – Wheel Hubs (17mm, lightened, aluminum, gun metal ano,TKR5071C – Wheel Hubs (17mm, lightened, aluminum, gun metal ano,

TKR5071B – Wheel Hubs (17mm, lightened, aluminum, gun metal ano, 1mm offset, w/pins, 2pcs) These 17mm Wheel Hubs increase the track width of your EB48 by 1mm, this increases stability and cornering. These are still ROAR legal when used on...

TKR5071C – Wheel Hubs (17mm, lightened, aluminum, gun metal ano, 2mm offset, w/pins, 2pcs) These 17mm Wheel Hubs increase the track width of your EB48 by 2mm, this increases stability and cornering. These are still ROAR legal when used on...

$14.99

$12.29

$14.99

$12.29

TKR5071X – Wheel Hubs (17mm, lightened, aluminum, gun metal anod TKR5079 – Stabilizer Balls (6.8mm, sway bars, 4pcs)
TKR5071X – Wheel Hubs (17mm, lightened, aluminum, gun metal anodTKR5079 – Stabilizer Balls (6.8mm, sway bars, 4pcs)

TKR5071X – Wheel Hubs (17mm, lightened, aluminum, gun metal anodized, w/pins, 2pcs) These 17mm Wheel Hubs are CNC cut to be lighter than stock by 2 grams. The Wheel Hubs are Lightened and anodized in the same gun metal color we use on all...

TKR5079 – Stabilizer Balls (6.8mm, sway bars, 4pcs)

$14.99

$12.29

$9.99

$8.19

TKR5102 – Steering Posts (steel) TKR5112 – Differential Outdrives (center)
TKR5102 – Steering Posts (steel)TKR5112 – Differential Outdrives (center)

TKR5102 – Steering Posts (steel)

TKR5112 – Differential Outdrives (center)

$11.99

$9.89

$17.99

$14.79

TKR5114XB – Differential Outdrives (front/rear, revised,lightend TKR5116B – Wheel Nuts (T Logo, 17mm, serrated, gun metal anodize
TKR5114XB – Differential Outdrives (front/rear, revised,lightendTKR5116B – Wheel Nuts (T Logo, 17mm, serrated, gun metal anodize

TKR5114XB – Differential Outdrives (front/rear, revised, lightened) These outdrives feature a revised design, revised steel alloy and new heat treatment process to extend life and improve consistency run after run. We always strive to...

TKR5116B – Wheel Nuts (T Logo, 17mm, serrated, gun metal anodized, M12x1.0, 4pcs) Not only do these wheel nuts look good, they also protect your stub axles from getting packed with dirt and the axle end from damage when scuffed against...

$21.99

$19.79

$24.99

$20.49

TKR5116C – Wheel Nuts (RC Logo, 17mm, serrated, gun metal anodiz TKR5117 – Ackermann Plate (composite)
TKR5116C – Wheel Nuts (RC Logo, 17mm, serrated, gun metal anodizTKR5117 – Ackermann Plate (composite)

TKR5116C – Wheel Nuts (RC Logo, 17mm, serrated, gun metal anodized, M12x1.0, 4pcs) Not only do these wheel nuts look good, they also protect your stub axles from getting packed with dirt and the axle end from damage when scuffed against...

TKR5117 – Ackermann Plate (composite)

$24.99

$20.49

$7.99

$6.59

TKR5149A – Differential Cross Pins (Aluminum, 6pcs) TKR5149X – Differential Cross Pins (composite, for 3 complete)
TKR5149A – Differential Cross Pins (Aluminum, 6pcs)TKR5149X – Differential Cross Pins (composite, for 3 complete)

TKR5149A – Differential Cross Pins (Aluminum, 6pcs, requires TKR5150 gears) These are the new pin design from TEKNO RC, these pins fit in the same differential case as the EB48 and SCT410. They do require the new differential gears TKR 5150...

TKR5149X – Differential Cross Pins (composite, for 3 complete diffs) This is a single lightweight composite differential cross pin for Tekno RC differentials. They are a direct replacement for TKR5149 and TKR5149A and come stock in the...

$15.99

$13.29

$7.99

$6.99

TKR5161 – V2 Adjustable Hinge Pin Brace “A” block, 7075 CNC, EB/ TKR5162 – V2 Adjustable Hinge Pin Brace “B” block, 7075 CNC, EB/
TKR5161 – V2 Adjustable Hinge Pin Brace “A” block, 7075 CNC, EB/TKR5162 – V2 Adjustable Hinge Pin Brace “B” block, 7075 CNC, EB/

TKR5161 – V2 Adjustable Hinge Pin Brace “A” block, 7075 CNC, EB/NB/ET/NT/SCT) The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level. You are now able to independently...

TKR5162 – V2 Adjustable Hinge Pin Brace “B” block, 7075 CNC, EB/NB/ET/NT/SCT) The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level. You are now able to independently...

$24.99

$21.99

(1)

$24.99

$21.99

TKR5163 – V2 Adjustable Hinge Pin Brace “C” block, 7075 CNC, EB/ TKR5164 – V2 Adjustable Hinge Pin Brace “D” block, 7075 CNC, EB/
TKR5163 – V2 Adjustable Hinge Pin Brace “C” block, 7075 CNC, EB/TKR5164 – V2 Adjustable Hinge Pin Brace “D” block, 7075 CNC, EB/

TKR5163 – V2 Adjustable Hinge Pin Brace “C” block, 7075 CNC, EB/NB/ET/NT/SCT) The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level. You are now able to independently...

TKR5164 – V2 Adjustable Hinge Pin Brace “D” block, 7075 CNC, EB/NB/ET/NT/SCT) The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level. You are now able to independently...

$24.99

$21.99

$24.99

$21.99

TKR5165 – V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCT TKR5166 – Front Bumper (revised, EB/NB/ET/NT)
TKR5165 – V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCTTKR5166 – Front Bumper (revised, EB/NB/ET/NT)

TKR5165 – V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCT) These are the hinge pin inserts for use with TKR5161, TKR5162, TKR5163, and TKR5164. They are also used for TKR5730. They are standard on the SCT410.3 and EB48SL and are 100%...

TKR5166 – Front Bumper (revised, EB/NB/ET/NT) This bumper allows for more front ground clearance on your EB/NB/ET/NT48 vehicle as well as the EB48SL. By eliminating the bumper area under the chassis we have improved bump and jump handling...

$9.99

$8.49

$5.99

$5.48

TKR5187 – Rod Ends (straight, 6.8mm, EB/NB/ET/NT48, 8pcs) TKR5191–Tapered Driveshaft (center, front, 7075 aluminum, EB,ET
TKR5187 – Rod Ends (straight, 6.8mm, EB/NB/ET/NT48, 8pcs)TKR5191–Tapered Driveshaft (center, front, 7075 aluminum, EB,ET

TKR5187 – Rod Ends (straight, 6.8mm, EB/NB/ET/NT48, 8pcs)

TKR5191 – Tapered Driveshaft (center, front, 7075 aluminum, black anodized) Lighten your EB48 up with this 7075 aluminum drive shaft by 10 grams! This drive shaft has 10 grams less rotating mass than the standard drive shaft for the...

$9.99

$8.49

$19.99

$16.99

(1)
TKR5193 Spindles trailing,L/R,requires TKR5194,EB/NB/ET/NT/NEB.3 TKR5194 – Spindle Carriers (trailing,15 degree, L/R, EB/NB/ET/NT
TKR5193 Spindles trailing,L/R,requires TKR5194,EB/NB/ET/NT/NEB.3TKR5194 – Spindle Carriers (trailing,15 degree, L/R, EB/NB/ET/NT

TKR5193 – Spindles (trailing, L/R, requires TKR5194, EB/NB/ET/NT48, EB/NB.3) These spindles feature 8x16x5mm (TKRBB08165) outer bearings, 13x19x4mm (TKRBB13194) inner bearings. They can also be used with universal driveshafts by using...

TKR5194 – Spindle Carriers (trailing, 15 degree, L/R, EB/NB/ET/NT/EB.3/NB.3) The 15 degree spindle carriers are ideal for bumpy or blown out tracks. They provide more stability in low-bite conditions and make the vehicle easier to drive....

$13.99

$11.98

(2)

$14.99

$12.99

(1)
TKR5199 – Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3) TKR5199A – Aluminum Rear Hubs gun metal ano, EB/NB/ET/NT/NB/EB.3
TKR5199 – Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3)TKR5199A – Aluminum Rear Hubs gun metal ano, EB/NB/ET/NT/NB/EB.3

TKR5199 – Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3)

These are compatible with TKR5030XT, TKR5430, and TKR5184 arms.

TKR5199A – Aluminum Rear Hubs (gun metal ano, EB/NB/ET/NT/EB.3/NB.3, 2pcs) These superbly machined rear hubs will add stability and strength to your vehicle. CNC machined from high quality aluminum then gun metal anodized for wear. They are...

$11.99

$10.28

$79.99

$67.99

TKR5199B – HRC Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48/48.3) TKR5206 – Brake Discs (fiberglass, 2pcs)
TKR5199B – HRC Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48/48.3)TKR5206 – Brake Discs (fiberglass, 2pcs)

TKR5199B – HRC Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3) By lowering the hinge pin location compared to the stock rear hubs (TKR5199), we have raised the rear roll center in just the right place. Use these hubs to increase on power...

TKR5206 – Brake Discs (fiberglass, 2pcs)

$11.99

$10.79

$7.99

$6.79

TKR5210X – Center Diff Motor Mount (7075, gun metal anodized, li TKR5211X – Motor Mount Insert (aluminum, gun metal anodized, lig
TKR5210X – Center Diff Motor Mount (7075, gun metal anodized, liTKR5211X – Motor Mount Insert (aluminum, gun metal anodized, lig

TKR5210X – Center Diff Motor Mount (7075, gun metal anodized, lightened) This Center Diff Motor Mount is 7075 CNC milled, this is standard for the SCT410. This can be used on an EB48 in place of TKR5210 and is 6 grams lighter.

TKR5211X – Motor Mount Insert (aluminum, gun metal anodized, lightened) Lighten your EB48 or SCT410 up with this CNC Motor mount insert, this insert is 5 grams lighter than the stock insert.

$47.99

$39.39

$24.99

$20.49

TKR5213A – Brake Posts (aluminum, 4pcs) TKR5214 – Brake Pads (steel, 4pcs)
TKR5213A – Brake Posts (aluminum, 4pcs)TKR5214 – Brake Pads (steel, 4pcs)

TKR5213A – Brake Posts (aluminum, 4pcs)

TKR5214 – Brake Pads (steel, 4pcs)

$15.99

$13.59

$11.99

$9.89

TKR5215B – Brake Cams (10° offset, steel, 2pcs) TKR5217 – Center Diff Rear Support (aluminum, gun metal anodized
TKR5215B – Brake Cams (10° offset, steel, 2pcs)TKR5217 – Center Diff Rear Support (aluminum, gun metal anodized

TKR5215B – Brake Cams (10° offset, steel, 2pcs) These brake cams will improve the braking response and feel on the NB and NT48 vehicles. They are also compatible with our EB/ET48 brake kits. The new cams feature a 10 degree offset that...

TKR5217 – Center Diff Rear Support (aluminum, gun metal anodized)

$19.99

$16.39

$29.99

$24.59

TKR5240 – Adjustable Hinge Pin Braces (front and rear, composite TKR5251 – Aluminum Servo Horn (23t spline)
TKR5240 – Adjustable Hinge Pin Braces (front and rear, compositeTKR5251 – Aluminum Servo Horn (23t spline)

TKR5240 – Adjustable Hinge Pin Braces (front and rear, composite

TKR5251 – Aluminum Servo Horn (23t spline) For: Airtronics, JR, KO Servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom mount design that, as opposed to a top...

$9.99

$8.19

$14.99

$12.29

TKR5251B – Aluminum Servo Horn (23T spline, M3 clamp,double hole TKR5252B – Aluminum Servo Horn (24T spline, M3 clamp,double hole
TKR5251B – Aluminum Servo Horn (23T spline, M3 clamp,double holeTKR5252B – Aluminum Servo Horn (24T spline, M3 clamp,double hole

TKR5251B – Aluminum Servo Horn (23T spline, M3 clamp, double hole) For: Airtronics, JR, KO servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom mount design...

TKR5252B – Aluminum Servo Horn (24T spline, M3 clamp, double hole) For: Hitec servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom mount design that, as opposed...

$15.99

$13.59

$15.99

$13.59

TKR5253B – Aluminum Servo Horn (25T spline, M3 clamp,double hole TKR5261 – Split Center Diff Motor Mount (complete, CNC 7075, gun
TKR5253B – Aluminum Servo Horn (25T spline, M3 clamp,double holeTKR5261 – Split Center Diff Motor Mount (complete, CNC 7075, gun

TKR5253B – Aluminum Servo Horn (25T spline, M3 clamp, double hole) For: Futaba, Pro-Tek, Savox, Highest servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom...

TKR5261 – Split Center Diff Motor Mount (complete, CNC 7075, gun metal, EB/ET/SCT) The CNC machined split center differential mount makes maintenance on the center differential of your vehicle a breeze. Machined from 7075 aluminum, then gun...

$15.99

$13.59

(2)

$79.99

$64.99

TKR5262 – CNC Split Cntr Diff Mount (diff mounts only, 7075, gun TKR5263 – Split Cntr Diff Mount (composite, requires TKR5260, EB
TKR5262 – CNC Split Cntr Diff Mount (diff mounts only, 7075, gunTKR5263 – Split Cntr Diff Mount (composite, requires TKR5260, EB

TKR5262 – CNC Split Cntr Diff Mount (diff mounts only, 7075, gun metal ano, EB/ET/SCT) This is the aluminum upgrade to the TKR5263 composite parts that come standard in the SCT410.3 and EB48SL. If you already have the TKR5260 split diff...

TKR5263 – Split Cntr Diff Mount (composite, requires TKR5260, EB/ET/SCT/SL) This is an inexpensive way to put a split center diff mount on your EB/ET/SCT/SL vehicle. These composite parts come standard on the SCT410.3 and EB48SL

$47.99

$40.99

$9.99

$8.49

TKR5298–Universal Driveshaft Set(front/rear,140mm, N&ET48/ET48.3 TKR5314 – Brake Pad Set (4pcs, NB48, NT48)
TKR5298–Universal Driveshaft Set(front/rear,140mm, N&ET48/ET48.3TKR5314 – Brake Pad Set (4pcs, NB48, NT48)

TKR5298 – Universal Driveshaft Set (front/rear, 140mm, ET48.3/NT48.3) Universal driveshafts are now available for the acclaimed ET48.3 and NT48.3 1/8th truggies. The driveshaft assemblies are CNC machined from high-quality steel alloy and...

TKR5314 – Brake Pad Set (4pcs, NB48, NT48)

$59.99

$53.99

$24.99

$20.49

TKR5433 – Rear Arm Guards (ET48, NT48) TKR5480 – Sway Bar (front, 2.3mm, ET48, NT48)
TKR5433 – Rear Arm Guards (ET48, NT48)TKR5480 – Sway Bar (front, 2.3mm, ET48, NT48)

TKR5433 – Rear Arm Guards (ET48, NT48)

TKR5480 – Sway Bar (front, 2.3mm, ET48, NT48)

$5.99

$4.99

$5.99

$4.99

TKR5481 – Sway Bar (front, 2.4mm, ET48, NT48) TKR5482 – Sway Bar (front, 2.5mm, ET48, NT48)
TKR5481 – Sway Bar (front, 2.4mm, ET48, NT48)TKR5482 – Sway Bar (front, 2.5mm, ET48, NT48)

TKR5481 – Sway Bar (front, 2.4mm, ET48, NT48)

TKR5482 – Sway Bar (front, 2.5mm, ET48, NT48)

$5.99

$4.99

$5.99

$4.99

TKR5484 – Sway Bar (front, 2.8mm, ET48, NT48) TKR5485 – Sway Bar (front, 3.0mm, ET48, NT48)
TKR5484 – Sway Bar (front, 2.8mm, ET48, NT48)TKR5485 – Sway Bar (front, 3.0mm, ET48, NT48)

TKR5484 – Sway Bar (front, 2.8mm, ET48, NT48)

TKR5485 – Sway Bar (front, 3.0mm, ET48, NT48)

$5.99

$4.99

$5.99

$4.99

TKR5490 – Sway Bar (rear, 2.3mm, ET48, NT48) TKR5491 – Sway Bar (rear, 2.4mm, ET48, NT48)
TKR5490 – Sway Bar (rear, 2.3mm, ET48, NT48)TKR5491 – Sway Bar (rear, 2.4mm, ET48, NT48)

TKR5490 – Sway Bar (rear, 2.3mm, ET48, NT48)

TKR5491 – Sway Bar (rear, 2.4mm, ET48, NT48)

$5.99

$4.99

$5.99

$4.99

TKR5492 – Sway Bar (rear, 2.5mm, ET48, NT48) TKR5494 – Sway Bar (rear, 2.8mm, ET48, NT48)
TKR5492 – Sway Bar (rear, 2.5mm, ET48, NT48)TKR5494 – Sway Bar (rear, 2.8mm, ET48, NT48)

TKR5492 – Sway Bar (rear, 2.5mm, ET48, NT48)

TKR5494 – Sway Bar (rear, 2.8mm, ET48, NT48)

$5.99

$4.99

$5.99

$4.99

TKR5495 – Sway Bar (rear, 3.0mm, ET48, NT48) TKR5496 – Sway Bar (rear, 2.1mm, EB.3/NB.3/SL/SCT.3/ET/NT)
TKR5495 – Sway Bar (rear, 3.0mm, ET48, NT48)TKR5496 – Sway Bar (rear, 2.1mm, EB.3/NB.3/SL/SCT.3/ET/NT)

TKR5495 – Sway Bar (rear, 3.0mm, ET48, NT48)

TKR5496 – Sway Bar (rear, 2.1mm, EB.3/NB.3/SL/SCT.3/ET/NT)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

$5.99

$4.99

$5.99

$4.99

TKR5497 – Sway Bar (rear, 2.2mm, EB.3/NB.3/SL/SCT.3/ET/NT) TKR5498 – Sway Bar (rear, 2.7mm, EB.3/NB.3/SL/SCT.3/ET/NT)
TKR5497 – Sway Bar (rear, 2.2mm, EB.3/NB.3/SL/SCT.3/ET/NT)TKR5498 – Sway Bar (rear, 2.7mm, EB.3/NB.3/SL/SCT.3/ET/NT)

TKR5497 – Sway Bar (rear, 2.2mm, EB.3/NB.3/SL/SCT.3/ET/NT)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

TKR5498 – Sway Bar (rear, 2.7mm, EB.3/NB.3/SL/SCT.3/ET/NT)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

$5.99

$4.99

$5.99

$4.99

TKR5499 – Sway Bar (rear, 2.9mm, EB.3/NB.3/SL/SCT.3/ET/NT) TKR5676A – Driveshaft (center, rear, aluminum, ET48)
TKR5499 – Sway Bar (rear, 2.9mm, EB.3/NB.3/SL/SCT.3/ET/NT)TKR5676A – Driveshaft (center, rear, aluminum, ET48)

TKR5499 – Sway Bar (rear, 2.9mm, EB.3/NB.3/SL/SCT.3/ET/NT)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

TKR5676A – Driveshaft (center, rear, aluminum, ET48)

$5.99

$4.99

$14.99

$12.29

TKR5790 – Bearing Sleeve Set (use 8x14x4mm in place of 8x16x5mm TKR6003B – Non-Vented Shock Caps (aluminum, gun metal anodized,
TKR5790 – Bearing Sleeve Set (use 8x14x4mm in place of 8x16x5mm TKR6003B – Non-Vented Shock Caps (aluminum, gun metal anodized,

Product Description TKR5790 – Bearing Sleeve Set (use 8x14x4mm in place of 8x16x5mm bearing, 6pcs) In RC, every gram counts. A lighter vehicle will corner faster and accelerate faster. Saving grams can be expensive at times. But not...

TKR6003B – Non-Vented Shock Caps (aluminum, gun metal anodized, 2pcs)

$6.99

$6.29

$19.99

$16.39

TKR6017T – Shock Shafts w/ TiNi Coating (truggys front/buggys & TKR6018 – Shock Cap and Spring Adjustment Nuts (composite, for 2
TKR6017T – Shock Shafts w/ TiNi Coating (truggys front/buggys & TKR6018 – Shock Cap and Spring Adjustment Nuts (composite, for 2

TKR6017T – Shock Shafts w/ TiNi Coating (truggys front/buggys & SCT rear, steel, 2pcs)

TKR6018 – Shock Cap and Spring Adjustment Nuts (composite, for 2 shocks) These Shock caps are the all in one cap for the EB48* and SCT410, they are capable of being used for standard build of shocks with the bleeder hole on the side,...

$19.99

$16.39

$9.99

$8.19

TKR6050 – Shock Pistons (CNC, conical, 10×1.1) TKR6061T – Shock Shafts w/ TiNi Coating (rear, x-long, steel, 2p
TKR6050 – Shock Pistons (CNC, conical, 10×1.1)TKR6061T – Shock Shafts w/ TiNi Coating (rear, x-long, steel, 2p

TKR6050 – Shock Pistons (CNC, conical, 10×1.1)

Made from self lubricating POM material and with our exclusive cone shape, these CNC pistons have 10 1.1mm holes and are machined to perfection.

TKR6061T – Shock Shafts w/ TiNi Coating (rear, x-long, steel, 2pcs)

$24.99

$20.49

$24.99

$20.49

TKR6063 – Shock Pistons (CNC, conical, 6×1.5, 10.6mm²) TKR6064 – Shock Pistons (CNC, conical, 6×1.6, 12.1mm²)
TKR6063 – Shock Pistons (CNC, conical, 6×1.5, 10.6mm²)TKR6064 – Shock Pistons (CNC, conical, 6×1.6, 12.1mm²)

TKR6063 – Shock Pistons (CNC, conical, 6×1.5, 10.6mm²) Made from self lubricating POM material and with our exclusive cone shape, these CNC pistons have (6) 1.5mm holes and are machined to perfection.

TKR6064 – Shock Pistons (CNC, conical, 6×1.6, 12.1mm²) Made from self lubricating POM material and with our exclusive cone shape, these CNC pistons have (6) 1.6mm holes and are machined to perfection.

$24.99

$20.49

(1)

$24.99

$20.49

TKR6065 – Shock Piston Blanks (CNC, conical, 16 dimples, 16mm) TKR6080 – Shock Spring Set (rear, 1.6×10.5T, 90mm, pink, 3.96 lb
TKR6065 – Shock Piston Blanks (CNC, conical, 16 dimples, 16mm)TKR6080 – Shock Spring Set (rear, 1.6×10.5T, 90mm, pink, 3.96 lb

TKR6065 – Shock Piston Blanks (CNC, conical, 16 dimples, 16mm) Made from self lubricating Delrin material with our exclusive conical design, these CNC pistons have 16 dimples to help you create custom pistons easily and are machined to...

TKR6080 – Shock Spring Set (rear, 1.6×10.5T, 90mm, pink, 3.96 lb/in)

$24.99

$20.49

$11.99

$9.89

TKR6082 – Shock Spring Set (rear, 1.6×9.5T, 90mm, yellow, 4.48 l TKR6083 – Shock Spring Set (rear, 1.6×9.0T, 90mm, orange, 4.80 l
TKR6082 – Shock Spring Set (rear, 1.6×9.5T, 90mm, yellow, 4.48 lTKR6083 – Shock Spring Set (rear, 1.6×9.0T, 90mm, orange, 4.80 l

TKR6082 – Shock Spring Set (rear, 1.6×9.5T, 90mm, yellow, 4.48 lb/in)

TKR6083 – Shock Spring Set (rear, 1.6×9.0T, 90mm, orange, 4.80 lb/in)

$11.99

$9.89

$11.99

$9.89

TKR6090 – Shock Spring Set (front, 1.6×9.0T, 80mm, pink, 4.80 lb TKR6092 – Shock Spring Set (front, 1.6×8.0T, 80mm, yellow, 5.60
TKR6090 – Shock Spring Set (front, 1.6×9.0T, 80mm, pink, 4.80 lbTKR6092 – Shock Spring Set (front, 1.6×8.0T, 80mm, yellow, 5.60

TKR6090 – Shock Spring Set (front, 1.6×9.0T, 80mm, pink, 4.80 lb/in)

TKR6092 – Shock Spring Set (front, 1.6×8.0T, 80mm, yellow, 5.60 lb/in)

$11.99

$9.89

$11.99

$9.89

TKR6093 – Shock Spring Set (front, 1.6×7.5T, 80mm, orange, 6.11 TKR6140 – Locking Shock Rod Ends and Spring Perch Set (All cars)
TKR6093 – Shock Spring Set (front, 1.6×7.5T, 80mm, orange, 6.11 TKR6140 – Locking Shock Rod Ends and Spring Perch Set (All cars)

TKR6093 – Shock Spring Set (front, 1.6×7.5T, 80mm, orange, 6.11 lb/in)

TKR6140 – Locking Shock Rod Ends and Spring Perch Set (EB/NB/ET/NT/SCT) Never lose a shock spring again with these locking shock spring perches and rod ends. An all new design that mates up perfectly with our durable new captured shock...

$11.99

$9.89

$11.99

$10.59

TKR6140B – Locking Shock Rod End and Tall Spring Perch Set TKR6144 – Shock Boots (long length, rear EB/NB/SCT, front ET/NT,
TKR6140B – Locking Shock Rod End and Tall Spring Perch Set TKR6144 – Shock Boots (long length, rear EB/NB/SCT, front ET/NT,

Product Description TKR6140B – Locking Shock Rod End and Spring Perch Set (revised, 16mm shocks) Feel confident your vehicle’s suspension will remain consistent over long mains with our new extended length spring perch. These locking...

TKR6144 – Shock Boots (long length, rear EB/NB/SCT, front ET/NT, 2pcs) The captured design of these shock boots will result in fewer ripped or torn boots while providing superior protection from dirt and debris. They will keep your...

$11.99

$10.79

$4.99

$4.29

TKR6145 – Shock Boots (XL length, rear ET/NT, 2pcs) TKR6146 – Shock Cartridge Set (CNC, Delrin, EB/NB/ET/NT/SCT)
TKR6145 – Shock Boots (XL length, rear ET/NT, 2pcs)TKR6146 – Shock Cartridge Set (CNC, Delrin, EB/NB/ET/NT/SCT)

TKR6145 – Shock Boots (XL length, rear ET/NT, 2pcs) The captured design of these shock boots will result in fewer ripped or torn boots while providing superior protection from dirt and debris. They will keep your suspension system free and...

TKR6146 – Shock Cartridge Set (CNC, Delrin, EB/NB/ET/NT/SCT) Make your Tekno RC shocks even smoother with these precision CNC machined Delrin shock guides. They are a direct replacement for the stock guides on all of your Tekno RC vehicles....

$4.99

$4.29

$19.99

$16.39

(1)
TKR6146B – Shock Cartridge Set (CNC,Delrin,revised,all 16mm Shks TKR6152 – Full Option Shock Kit (122mm, no springs, no pistons)
TKR6146B – Shock Cartridge Set (CNC,Delrin,revised,all 16mm ShksTKR6152 – Full Option Shock Kit (122mm, no springs, no pistons)

TKR6146B – Shock Cartridge Set (CNC, Delrin, revised, all 16mm shocks) This shock cartridge set has been revised from TKR6146 by reducing the height of the bottom guide to allow additional up-travel. This results in better bump handling and...

TKR6152 – Full Option Shock Kit (122mm, no springs, no pistons) Full option shock sets include all the best parts available and allow you to build the best shocks on the market – hands down! Included in the package are hard anodized,...

$19.99

$17.98

$84.99

$72.99

TKR6153 – Full Option Shock Kit (137mm, no springs, no pistons) TKR6159 – Shock Pistons (CNC, flat/tapered, 4×1.8, 10.2mm2)
TKR6153 – Full Option Shock Kit (137mm, no springs, no pistons)TKR6159 – Shock Pistons (CNC, flat/tapered, 4×1.8, 10.2mm2)

TKR6153 – Full Option Shock Kit (137mm, no springs, no pistons) Full option shock sets include all the best parts available and allow you to build the best shocks on the market – hands down! Included in the package are hard anodized,...

TKR6159 – Shock Pistons (CNC, flat/tapered, 4×1.8, 10.2mm2) Made from self lubricating Delrin material utilizing a new tapered shape, these CNC pistons have (4x) 1.8mm holes and are machined to perfection. Total piston hole area is...

$89.99

$76.99

$24.99

$20.48

TKR6160 – Shock Piston Blanks (CNC, flat/tapered,16 dimples,4pcs TKR6162 – Shock Pistons (CNC, flat/tapered, 3×2.1, 10.4mm2, 4pcs
TKR6160 – Shock Piston Blanks (CNC, flat/tapered,16 dimples,4pcsTKR6162 – Shock Pistons (CNC, flat/tapered, 3×2.1, 10.4mm2, 4pcs

TKR6160 – Shock Piston Blanks (CNC, flat/tapered, 16 dimples, 4pcs) Made from self lubricating Delrin material utilizing a new tapered shape, these CNC pistons have 16 dimples for easy drilling and are machined to perfection. For use in all...

TKR6162 – Shock Pistons (CNC, flat/tapered, 3×2.1, 10.4mm2, 4pcs) Another piston option is now available for all Tekno RC vehicles! These pistons excel when used with our NB48.3 and EB48.3 vehicles on bumpy tracks where less pack than...

$24.99

$20.48

$24.99

$20.48

TKR6163 – Shock Piston Blanks (CNC, flat/flat, 16 dimples) TKR8100 – Ackermann Plate (7075, gun metal anodized, EB/NB48.4)
TKR6163 – Shock Piston Blanks (CNC, flat/flat, 16 dimples)TKR8100 – Ackermann Plate (7075, gun metal anodized, EB/NB48.4)

Product Description TKR6163 – Shock Piston Blanks (CNC, flat/flat, 16 dimples) Made from self lubricating Delrin material utilizing a new tapered shape, these CNC pistons have 16 dimples machined to perfection for easy drilling. These can...

Product Description

TKR8100 – Ackermann Plate (7075, gun metal anodized, EB/NB48.4)

NOTE: Requires TKR8104 Bell Cranks and also TKR1403 M3x10 Button Head Screws.

$24.99

$22.49

$9.99

$8.99

TKR8104–Bell Cranks and Top Plates(requires TKR8100, MT, Option TKR8702–Shock Caps(7075,emulsion/vented/standard,black ano,2pcs
TKR8104–Bell Cranks and Top Plates(requires TKR8100, MT, OptionTKR8702–Shock Caps(7075,emulsion/vented/standard,black ano,2pcs

TKR8104 – Bell Cranks and Top Plates (requires TKR8100, EB/NB/ET/NT/SCT/MT)

NOTE: Requires TKR8100 Ackermann Plate and also TKR1403 M3x10 Button Head Screws.

Product Description TKR8702 – Shock Caps (7075, emulsion/vented/standard, black ano, 2pcs) One shock cap for standard, vented and emulsion shock building styles! CNC machined from 7075 aluminum and black anodized, Tekno RC’s TKR8702...

$11.99

$10.79

$24.99

$22.49