M2C Racing Products / Clutches Tekno NT48/.3

 
1 - 18 of 18 items
Sort By:
M2C6502 TEKNO EB BUGGY/SCT410 FRONT/ REAR SKID PLATE M2C6503 2.5 x 4 MM FRONT/ REAR SKID PLATE SCREWS
M2C6502 TEKNO EB BUGGY/SCT410 FRONT/ REAR SKID PLATE M2C6503 2.5 x 4 MM FRONT/ REAR SKID PLATE SCREWS

These skid plates are steel plates to assure very long wear life. black oxide to prevent rust. it is advised that you replace the skid plates when they have worn down to about 1 mm thick. this will greatly increase the life of the chassis and...

2.5 X 4 MM flathead screws. these are 12.9 grade screws

8per pack

$15.00

$12.99

$5.00

$4.29

M2C 6099 CLUTCH BELL RETAINING WASHER M2c 6100 GEN 2 34MM (4) MED SHOE QUICKCHANGE VAR. WT. KIT 6100
M2C 6099 CLUTCH BELL RETAINING WASHERM2c 6100 GEN 2 34MM (4) MED SHOE QUICKCHANGE VAR. WT. KIT 6100

THIS LITTLE WASHER COULD SAVE YOUR CLUTCHBELL, SPUR GEAR AND GAS TANK IF A CLUTCH BELL BEARINGS FAILS AND COMES APART. THIS SYSTEM CAPTURES THE BEARING AND THE CLUTCH BELL TO KEEP EVERYTHING IN PLACE IF THE BEARING FAILS. THERE IS A SMALL STEP ON...

WELCOME to GENERATION 2 OF M2C RACING"S FLYWHEELSKITS. THIS MODEL HAS A LARGER(,3 MM FLYWHEEL PIN AT THE BOTTOM OF THE SHOE WHICH WILL GIVE MUCH LONGER LIFE TO THE FLYWHEEL PINS. THE LIGHTEST TO THE HEAVIEST FLYWHEEL iN ALUMINUM ON THE MARKET BY...

$5.00

$4.49

$54.98

$46.99

M2C 6101 GEN 2 34MM (4) HARD QUICK CHANGE VAR. WT. KIT M2C 6186 (4) SHOE CLUTCHES (MEDIUM) GEN 2 SYSTEM(4)
M2C 6101 GEN 2 34MM (4) HARD QUICK CHANGE VAR. WT. KITM2C 6186 (4) SHOE CLUTCHES (MEDIUM) GEN 2 SYSTEM(4)

WELCOME to GENERATION 2 OF M2C RACING"S FLYWHEELSKITS. THIS MODEL HAS A LARGER(,3 MM FLYWHEEL PIN AT THE BOTTOM OF THE SHOE WHICH WILL GIVE MUCH LONGER LIFE TO THE FLYWHEEL PINS. THE LIGHTEST TO THE HEAVIEST FLYWHEEL iN ALUMINUM ON THE MARKET BY...

GENERATION 2 (MEDIUM) 4 SHOE CLUTCHES (4)THESE SHOES FITS THE GENERATION 2 M2C RACING 4 SHOE FLYWHEELS THESE SHOES WILL NOT WORK ON THE GEN 1 FLYWHEEL SYSTEMS PLEASE BE CAREFUL WHEN ORDERING THESE SHOES WILL NOT WORK ON GENERATION 1 FLYWHEELS....

$54.98

$46.99

$19.98

$16.98

M2C 6187 (4) SHOE CLUTCHES HARD GEN 2 SYSTEM(4) M2C 6610 TEKNO SHOCK CAP BUSHINGS FITS ALL
M2C 6187 (4) SHOE CLUTCHES HARD GEN 2 SYSTEM(4)M2C 6610 TEKNO SHOCK CAP BUSHINGS FITS ALL

GENERATION 2 REG HARD 4 SHOE CLUTCHES (4)THESE SHOES FITS THE GENERATION 2 M2C RACING 4 SHOE FLYWHEELS THESE SHOES WILL NOT WORK ON THE GEN 1 FLYWHEEL SYSTEMS PLEASE BE CAREFUL WHEN ORDERING THESE SHOES WILL NOT WORK ON GENERATION 1 FLYWHEELS....

THE bushings are made with delrin material which lasts a lot longer than the stock injected plastic. these bushings should fit all tekno models.

$19.98

$16.98

$5.00

$4.49

M2C 6615 TEKNO NT/ET/NB/EB48.3/SCT410.3 ACKERMAN BAR M2C 6660 TEKNO 23 SPLINE THROTTLE SERVO HORN/KYOPROPO AIR
M2C 6615 TEKNO NT/ET/NB/EB48.3/SCT410.3 ACKERMAN BARM2C 6660 TEKNO 23 SPLINE THROTTLE SERVO HORN/KYOPROPO AIR

Made with 7075-t6 aircraft aluminum andanodized black. this block is designed to replace TKR 5117 AND TKR 5100.

MADE OF 7075 aircraft aluminum for maximium strength.the spline is a hardened steel insert for super long life. 23 spline FITS KOPROPO,AIRTRONICS, AE,JR SERVOS. Please be aware that the fit is sometimes a little snug if you are putting this unit...

$19.98

$16.98

$19.98

$16.98

M2C 6661 TEKNO 24 SPLINE ALUMINUM THROTTLE SERVO HORN / HITEC M2C 6662 25 TEKNO THROTTLE SERVO HORN/ SAVOX,FUTOBA
M2C 6661 TEKNO 24 SPLINE ALUMINUM THROTTLE SERVO HORN / HITECM2C 6662 25 TEKNO THROTTLE SERVO HORN/ SAVOX,FUTOBA

MADE OF 7075 aircraft aluminum for maximium strength.the spline is a hardened steel insert for super long life. 23 spline FITS HITEC SERVOS INCLUDES 2.6X10MM SOCKET HEAD SCREW Please be aware that the fit is sometimes a little snug if you are...

MADE OF 7075 aircraft aluminum for maximium strength.the spline is a hardened steel insert for super long life. 25 spline FITS SAVOX,PROTEC,FUTOBA RADIO POST, AE Please be aware that the fit is sometimes a little snug if you are putting this unit...

$19.98

$16.98

$19.98

$16.98

M2C6501 TEKNO EB BUGGY/SCT410 FRONT/ REAR SKID PLATE M2C6585 TEKNO NT48.3 GAS TRUGGY CHASSIS
M2C6501 TEKNO EB BUGGY/SCT410 FRONT/ REAR SKID PLATE M2C6585 TEKNO NT48.3 GAS TRUGGY CHASSIS

These skid plates are steel plates to assure very long wear life. black oxide to prevent rust. it is advised that you replace the skid plates when they have worn down to about 1 mm thick. this will greatly increase the life of the chassis and...

These chassis are made using 4 MM thick 7075 aircraft grade materials and clear anodized. use of the material greatly increases the overall life of the chassis. we have tested and tweeked these chassis to provide the racers a top notch chassis...

$15.00

$12.99

$124.95

$105.99

M2C6607 TENKO INNER HINGE PINS M2C6705 TEKNO REAR SHOCK TOWER BRACE
M2C6607 TENKO INNER HINGE PINSM2C6705 TEKNO REAR SHOCK TOWER BRACE

These are hinge pins  are made of tool steel grade material. 2 hinge pins per pack. Hardened and nichel plated for strength.

Made with 6061-t6 and anodized black. This part is designed to give the upper portion of the tower more support to prevent bending. It will also help transfer the pressure of an upside down landing thru the center brace to the chassis and help...

$10.00

$8.50

$20.00

$16.99

M2C6720 TEKNO 48.3 3 PC QUICK CHANGE MOTOR MOUNT M2C9551 FLAT BACK WING MOUNT
M2C6720 TEKNO 48.3 3 PC QUICK CHANGE MOTOR MOUNTM2C9551 FLAT BACK WING MOUNT

this mount is made using 7075-t6 Aircraft aluminum and anodized black. This is a time tested mount and help with chassis flex in the clutch bell area. this mount comes with (4) 3mm x 6 set screws that once you have the mesh set, remove the motor...

These wing washers are made with 6061 aluminum  and anodized black. they are designed with a flat back for mounting.

$49.98

$42.48

$8.00

$6.89