M2C Racing products Tekno EB48/.3 SCT410/410.3/SL

 
1 - 18 of 18 items
Sort By:
M2C6500 TEKNO 1/8 EB SCALE/SCT410 CHASSIS STD Battery M2C 6700 TEKNO SCT410.3 17MM ADAPTOR KIT
M2C6500 TEKNO 1/8 EB SCALE/SCT410 CHASSIS STD Battery M2C 6700 TEKNO SCT410.3 17MM ADAPTOR KIT

These chassis are made using 1/8 inch(3.25mm) thick 7075 aircraft grade materials and clear anodized. use of the material greatly increases the overall life of the chassis. we have tested and tweeked these chassis to provide the racers a top...

17MM HEX ADAPTORS FITS 6 MM AXLES FROM .kIT INCLUDES (4) 17MM NUTS AND (4) 17MM HEX ADAPTORS AND (4) RETAINER 5mm NUTS THIS IS A DIRECT BOLT ON SYSTEM . USES THE STOCK PIN . THE HEX NUTS ARE HELD ON TO THE AXLE WITH THE SMALL END CAPS THAT SCREW...

$114.99

$91.99

$39.99

$33.99

M2C6730 TEKNO "0" CENTERLINE DELRIN BUSHING 4 pcs per pk. M2C6737 TEKNO 4 MM TAPERED INNER HINGE PINS 5 pcs per pk.
M2C6730 TEKNO "0" CENTERLINE DELRIN BUSHING 4 pcs per pk.M2C6737 TEKNO 4 MM TAPERED INNER HINGE PINS 5 pcs per pk.
These bushings fit stock 8.3 tekno BLOCKS. made using Delrin material. These bushings have proven to last much longer than the stock injected bushings . These bushings are made to be used with our tapered hinge pins and will not work with the...These are TAPERED hinge pins are made of tool steel grade material. 5 hinge pins per pack. Hardened and nichel plated for strength. The pins are designed for the arm and hinge pin to rotate in the bushing, so even if you bend a hinge pin it will...

$5.00

$4.79

$25.00

$23.99

M2C6780 TEKNO FRONT SUSPENSION SUPPORT BLOCKS FITS 48.3 AND 48.4 M2C6785 TEKNO 48.3 REAR SUSPENSION SUPPORT SYSTEM
M2C6780 TEKNO FRONT SUSPENSION SUPPORT BLOCKS FITS 48.3 AND 48.4M2C6785 TEKNO 48.3 REAR SUSPENSION SUPPORT SYSTEM

This model fits both 48.3 and 48.4 cars. buggy and truggy. Made using 7075-T6 Aircraft aluminum and anodized black. these blocks are designed to stand up to the rigors of RC car racing. I have made these blocks to be heavy duty. and should...

This model fits both 48.3 gas & EB . buggy and truggy. SCT SL Made using 7075-T6 Aircraft aluminum and anodized black. these blocks are designed to stand up to the rigors of RC car racing. I have made these blocks to be heavy duty. and should...

$59.99

$56.99

$59.99

$56.99

M2C 6610 TEKNO SHOCK CAP BUSHINGS FITS ALL M2C 6615 TEKNO NT/ET/NB/EB48.3/SCT410.3 ACKERMAN BAR
M2C 6610 TEKNO SHOCK CAP BUSHINGS FITS ALLM2C 6615 TEKNO NT/ET/NB/EB48.3/SCT410.3 ACKERMAN BAR

THE bushings are made with delrin material which lasts a lot longer than the stock injected plastic. these bushings should fit all tekno models.

Made with 7075-t6 aircraft aluminum andanodized black. this block is designed to replace TKR 5117 AND TKR 5100.

$5.00

$4.49

$19.98

$16.98

M2C6607 TENKO INNER HINGE PINS M2C6620 TEKNO SCT 410.3 FRONT SHOCK TOWER
M2C6607 TENKO INNER HINGE PINSM2C6620 TEKNO SCT 410.3 FRONT SHOCK TOWER

These are hinge pins  are made of tool steel grade material. 2 hinge pins per pack. Hardened and nichel plated for strength.

Made with 7075-T6 Aircraft grade aluminim, anodized black. This is the same material we have been using on other vehicles and has proven to stand up to most any crash. We are confident enough to offer a 6 months warrentee with the proof of purchase

$10.00

$8.50

$40.00

$33.98

M2C6625 TEKNO SCT 410.3 REAR SHOCK TOWER M2C6705 TEKNO REAR SHOCK TOWER BRACE
M2C6625 TEKNO SCT 410.3 REAR SHOCK TOWERM2C6705 TEKNO REAR SHOCK TOWER BRACE

Made with 7075-T6 Aircraft grade aluminim, anodized black. This is the same material we have been using on other vehicles and has proven to stand up to most any crash. We are confident enough to offer a 6 months warrentee

Made with 6061-t6 and anodized black. This part is designed to give the upper portion of the tower more support to prevent bending. It will also help transfer the pressure of an upside down landing thru the center brace to the chassis and help...

$40.00

$33.98

$20.00

$16.99

M2C9551 FLAT BACK WING MOUNT M2C6502 TEKNO EB BUGGY/SCT410 FRONT/ REAR SKID PLATE
M2C9551 FLAT BACK WING MOUNT M2C6502 TEKNO EB BUGGY/SCT410 FRONT/ REAR SKID PLATE

These wing washers are made with 6061 aluminum  and anodized black. they are designed with a flat back for mounting.

These skid plates are steel plates to assure very long wear life. black oxide to prevent rust. it is advised that you replace the skid plates when they have worn down to about 1 mm thick. this will greatly increase the life of the chassis and...

$8.00

$6.89

$15.00

$12.99

M2C6503 2.5 x 4 MM FRONT/ REAR SKID PLATE SCREWS M2C6501 TEKNO EB BUGGY/SCT410 FRONT/ REAR SKID PLATE
M2C6503 2.5 x 4 MM FRONT/ REAR SKID PLATE SCREWS M2C6501 TEKNO EB BUGGY/SCT410 FRONT/ REAR SKID PLATE

2.5 X 4 MM flathead screws. these are 12.9 grade screws

8per pack

These skid plates are steel plates to assure very long wear life. black oxide to prevent rust. it is advised that you replace the skid plates when they have worn down to about 1 mm thick. this will greatly increase the life of the chassis and...

$5.00

$4.29

$15.00

$12.99

M2C6590 TEKNO EB 1/8 SCALE/SCT410 Dual Battery Location CHASSIS M2C6650 TEKNO 410 SCTE 4X4 17MM ADAPTOR KIT
M2C6590 TEKNO EB 1/8 SCALE/SCT410 Dual Battery Location CHASSIS M2C6650 TEKNO 410 SCTE 4X4 17MM ADAPTOR KIT

These chassis are made using 1/8 inch(3.25mm) thick 7075 aircraft grade materials and clear anodized. use of the material greatly increases the overall life of the chassis. we have tested and tweeked these chassis to provide the racers a top...

17MM HEX ADAPTORS FITS 6 MM AXLES FROM .kIT INCLUDES (4) 17MM NUTS AND (4) 17MM HEX ADAPTORS AND (4) RETAINER NUTS THIS IS A DIRECT BOLT ON SYSTEM . USES THE STOCK PIN . THE HEX NUTS ARE HELD ON TO THE AXLE WITH THE SMALL END CAPS THAT SCREW TO...

$114.99

$91.99

$39.95

$34.95