NB48 Option Parts

 
1 - 120 of 156 items
Sort By:
Tekno EB/NB48 to EB/NB48.3 Basic upgrade kit Assassin body (clear) for Tekno NB48-NB48.4
Tekno EB/NB48 to EB/NB48.3 Basic upgrade kitAssassin body (clear) for Tekno NB48-NB48.4

This is a EB/NB48 basic upgrade kit to get the suspenision geometry of the .3. You use your rear shocks on the front, and the shock bodies and shafts included in this kit on the rear. Whats included 1x TKR5491 – Sway Bar (rear, 2.4mm, ET48,...

Assassin body for Tekno NB48-NB48.4

$194.99

$139.98

(4)

$31.50

$24.99

Fin, 1/8th Serrated Light-weight Wheel Nut Black Fin, 1/8th Serrated Light-weight Wheel Nut Blue
Fin, 1/8th Serrated Light-weight Wheel Nut BlackFin, 1/8th Serrated Light-weight Wheel Nut Blue

When competitive racing hits the boiling point, everyone reaches for light-weight items. JConcepts has the answer with the introduction of the Fin styled light-weight 17mm fine thread wheel nut set. These high precision wheel nuts are flanged and...

When competitive racing hits the boiling point, everyone reaches for light-weight items. JConcepts has the answer with the introduction of the Fin styled light-weight 17mm fine thread wheel nut set. These high precision wheel nuts are flanged and...

$30.00

$25.98

$30.00

$25.98

Gamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 HIGH Gamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 Low P
Gamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 HIGHGamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 Low P

HIGH PACK Pair of (2) VRP 'Gamechanger' Pistons - 8H1.6/1.3mm For Tekno NB48.3/EB48.3 as tested by Ryan Lutz The (4) Exposed Main Holes are 1.6mm with the (4) Valved holes at 1.3mm

LOW PACK Pair of (2) VRP 'Gamechanger' Pistons - 8H1.6/1.3mm For Tekno NB48.3/EB48.3 as tested by Ryan Lutz The (4) Exposed Main Holes are 1.6mm with the (4) Valved holes at 1.3mm

$32.50

$28.49

$32.50

$28.49

Gamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 MED P Illuzion - 1/8th Wheel Nuts (fine thread) Black
Gamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 MED PIlluzion - 1/8th Wheel Nuts (fine thread) Black

MED PACK Pair of (2) VRP 'Gamechanger' Pistons - 8H1.6/1.3mm For Tekno NB48.3/EB48.3 as tested by Ryan Lutz The (4) Exposed Main Holes are 1.6mm with the (4) Valved holes at 1.3mm

JConcepts has your 1/8th buggy or truck, locking wheel nut needs covered with the 17mm fine thread capped wheel nut set. These high precision wheel nuts are flanged and knurled for locking security and feature a closed end to protect from dirt...

$32.50

$28.49

$22.00

$18.99

Illuzion - 1/8th Wheel Nuts (fine thread) Blue SCT410/3/EB/NB/ET/NT48 & SL V2 aluminum hinge pin brace kit
Illuzion - 1/8th Wheel Nuts (fine thread) BlueSCT410/3/EB/NB/ET/NT48 & SL V2 aluminum hinge pin brace kit

JConcepts has your 1/8th buggy or truck, locking wheel nut needs covered with the 17mm fine thread capped wheel nut set. These high precision wheel nuts are flanged and knurled for locking security and feature a closed end to protect from dirt...

  This is a V2 adjustable hinge pin brace kit. Can be used on the SCT410, SCT410.3, EB/NB/ET/NT48 and SL. Heres what you get. TKR5161 – V2 Adjustable Hinge Pin Brace “A” block, 7075 CNC,...

$22.00

$18.99

$109.95

$79.99

(1)
TKR1103 – Turnbuckle Wrench (4mm, 5mm, hardened steel) TKR1115 – Pivot Ball and Shock Multi-tool (aluminum)
TKR1103 – Turnbuckle Wrench (4mm, 5mm, hardened steel)TKR1115 – Pivot Ball and Shock Multi-tool (aluminum)

TKR1103 – Turnbuckle Wrench (4mm, 5mm, hardened steel) How do you improve on a simple turnbuckle wrench? The current crop of aluminum turnbuckle wrenches just aren’t cutting it in terms of durability. They wear out easily and are...

TKR1115 – Multi-Purpose Shock/Ball End Tool (shock shafts, shock caps, ball ends) Our new innovative shock/ball end tool is going to change the way you look at working on your RC vehicle. It incorporates many extremely useful features into...

$14.99

$12.29

(1)

$39.99

$33.99

(1)
TKR1116 – 17mm Wheel Wrench, Shock Cap Tool TKR1119 – Wrench (5.5mm / 7.0mm, hardened steel)
TKR1116 – 17mm Wheel Wrench, Shock Cap ToolTKR1119 – Wrench (5.5mm / 7.0mm, hardened steel)

TKR1116 – 17mm Wheel Wrench, Shock Cap Tool We are proud to put our own spin on the wheel wrench (no pun intended). Our unique handle design is comfortable in the hand and provides much more leverage versus traditional designs. This is...

TKR1119 – Wrench (5.5mm / 7.0mm, hardened steel) The Tekno RC tool product line is expanding. This dual ended tool is perfect for any application requiring a 5.5mm (M3 nut) or 7mm (M4 nut) wrench. It is compact and extremely durable so it...

$29.99

$24.99

$14.99

$12.29

TKR1121 – Pit Mat (Tekno RC logo, dark blue, 2’x4′) TKR1220 – M3 Countersunk Washers (aluminum, natural, 10pcs)
TKR1121 – Pit Mat (Tekno RC logo, dark blue, 2’x4′)TKR1220 – M3 Countersunk Washers (aluminum, natural, 10pcs)

TKR1121 – Pit Mat (Tekno RC logo, dark blue, 2’x4′)

TKR1220 – M3 Countersunk Washers (aluminum, natural, 10pcs)

$24.99

$20.98

(1)

$7.99

$6.59

TKR1228 – M4 Countersunk Washers (black anodized, 10pcs) TKR1238 – Droop Adjustment Screws (M4x10mm, 8pcs)
TKR1228 – M4 Countersunk Washers (black anodized, 10pcs)TKR1238 – Droop Adjustment Screws (M4x10mm, 8pcs)

TKR1228 – M4 Countersunk Washers (black anodized, 10pcs)

TKR1238 – Droop Adjustment Screws (M4x10mm, 8pcs) Our new droop screws makes it a breeze to set droop on your vehicle. A 2.0 hex is machined on the shank end for easy adjustment and a normal 2.5mm hex is on the button head. They are...

$7.99

$6.59

$7.99

$6.59

TKR1240 – Lower Shock Mount Screws (2 clockwise threads, 2 count TKR1250 – Steering Link Screws (black, steel, 2pcs)
TKR1240 – Lower Shock Mount Screws (2 clockwise threads, 2 countTKR1250 – Steering Link Screws (black, steel, 2pcs)

TKR1240 – Lower Shock Mount Screws (2 clockwise threads, 2 counter clockwise threads, EB/NB/SCT) Ensure that your shock screws never come loose with these CW and CCW shock mount screws. These screws also feature a dimple for easy...

Product Description

TKR1250 – Steering Link Screws (black, steel, 2pcs)

$4.99

$4.29

(1)

$2.99

$2.69

TKR1403 – M3x10mm Button Head Screws (black, 10pcs) TKR1605 – M3x10mm Set Screws (black, 10pcs)
TKR1403 – M3x10mm Button Head Screws (black, 10pcs)TKR1605 – M3x10mm Set Screws (black, 10pcs)

Product Description

TKR1403 – M3x10mm Button Head Screws (black, 10pcs)

These screws are for the new stamped ackermann plate (TKR8100).

TKR1605 – M3x10mm Set Screws (black, 10pcs)

These are used to secure the locking spring perch and rod ends (TKR6140) and can also be used anywhere an M3x10mm set screw is required.

$3.99

$3.59

$3.99

$3.49

TKR1609 – M3x3mm Set Screws (black, 10pcs) TKR4215 – Clutch Bell (15t, NB48)
TKR1609 – M3x3mm Set Screws (black, 10pcs)TKR4215 – Clutch Bell (15t, NB48)

TKR1609 – M3x3mm Set Screws (black, 10pcs) These are used on the following products: TKR5571M – 12mm clamping hexes TKR5199A – CNC rear hubs for EB/NB/ET/NT48 TKR5336B – NB/NT throttle linkage

TKR4215 – Clutch Bell (15t, NB48)

$3.99

$3.49

$19.99

$16.39

TKR5013C – Adjustable Hinge Pin Brace (rear outer, LRC -1.0, toe TKR5018 – Front Bumper
TKR5013C – Adjustable Hinge Pin Brace (rear outer, LRC -1.0, toeTKR5018 – Front Bumper

TKR5013C – Adjustable Hinge Pin Brace (rear outer, LRC -1.0, toe -1.0, 7075 CNC, gun metal anodized, EB/NB/ET/NT/SCT) After extensive testing and support from our customers we have designed a new rear hinge pin brace that produces a lower...

TKR5018 – Front Bumper

$24.99

$14.98

$5.99

$4.99

TKR5028C – Shock Tower (front, carbon fiber, 5mm) TKR5029C – Shock Tower (rear, carbon fiber, 4mm)
TKR5028C – Shock Tower (front, carbon fiber, 5mm)TKR5029C – Shock Tower (rear, carbon fiber, 4mm)

TKR5028C – Shock Tower (front, carbon fiber, 5mm) Made from high quality carbon fiber at 5mm thick Reduces the weight of the SCT410 by 7.6 grams Reduces the weight of the EB48 by 15.7 grams

TKR5029C – Shock Tower (rear, carbon fiber, 4mm) Made from high quality carbon fiber at 4mm thick Reduces the weight of the SCT410 by 10.4 grams Reduces the weight of the EB48 by 18 grams

$39.99

$32.99

$39.99

$32.99

TKR5042 – Spindle Carriers (10 degrees caster, left and right) TKR5070A – Stub Axles (aluminum, 2pcs)
TKR5042 – Spindle Carriers (10 degrees caster, left and right)TKR5070A – Stub Axles (aluminum, 2pcs)

TKR5042 – Spindle Carriers (10 degrees caster, left and right) *Combined with the chassis kick up and ability to adjust that angle with the front inner hinge pin inserts, the total caster on the vehicles can be adjusted from 20 deg (single...

The Tekno RC Aluminum Stub Axles are designed to reduce rotating mass as well as unsprung weight without sacrificing strength or durability. After undergoing several months of race proven testing, they meet our high...

$13.99

$11.49

$24.99

$21.99

TKR5071 – Wheel Hubs (17mm, aluminum, gun metal anodized, w/pins TKR5071X – Wheel Hubs (17mm, lightened, aluminum, gun metal anod
TKR5071 – Wheel Hubs (17mm, aluminum, gun metal anodized, w/pinsTKR5071X – Wheel Hubs (17mm, lightened, aluminum, gun metal anod

TKR5071 – Wheel Hubs (17mm, aluminum, gun metal anodized, w/pins, 2pcs)

TKR5071X – Wheel Hubs (17mm, lightened, aluminum, gun metal anodized, w/pins, 2pcs) These 17mm Wheel Hubs are CNC cut to be lighter than stock by 2 grams. The Wheel Hubs are Lightened and anodized in the same gun metal color we use on all...

$9.99

$8.19

$14.99

$12.29

TKR5079 – Stabilizer Balls (6.8mm, sway bars, 4pcs) TKR5080 – Sway Bar (front/rear, 2.2mm)
TKR5079 – Stabilizer Balls (6.8mm, sway bars, 4pcs)TKR5080 – Sway Bar (front/rear, 2.2mm)

TKR5079 – Stabilizer Balls (6.8mm, sway bars, 4pcs)

TKR5080 – Sway Bar (front/rear, 2.2mm)

$9.99

$8.19

$4.99

$3.99

TKR5081 – Sway Bar (front/rear, 2.3mm) TKR5082 – Sway Bar (front/rear, 2.4mm)
TKR5081 – Sway Bar (front/rear, 2.3mm)TKR5082 – Sway Bar (front/rear, 2.4mm)

TKR5081 – Sway Bar (front/rear, 2.3mm)

TKR5082 – Sway Bar (front/rear, 2.4mm)

$4.99

$3.99

$4.99

$3.99

TKR5083 – Sway Bar (front/rear, 2.5mm) TKR5084 – Sway Bar (front/rear, 2.6mm)
TKR5083 – Sway Bar (front/rear, 2.5mm)TKR5084 – Sway Bar (front/rear, 2.6mm)

TKR5083 – Sway Bar (front/rear, 2.5mm)

TKR5084 – Sway Bar (front/rear, 2.6mm)

$4.99

$3.99

$4.99

$3.99

TKR5085 – Sway Bar (front/rear, 2.8mm) TKR5087 – Sway Bar (front/rear, 3.0mm)
TKR5085 – Sway Bar (front/rear, 2.8mm)TKR5087 – Sway Bar (front/rear, 3.0mm)

TKR5085 – Sway Bar (front/rear, 2.8mm)

TKR5087 – Sway Bar (front/rear, 3.0mm)

$4.99

$3.99

$4.99

$3.99

TKR5092 – Sway Bar (front, 2.0mm, EB.3/NB.3/SL/SCT.3) TKR5093 – Sway Bar (front, 2.1mm, EB.3/NB.3/SL/SCT.3)
TKR5092 – Sway Bar (front, 2.0mm, EB.3/NB.3/SL/SCT.3)TKR5093 – Sway Bar (front, 2.1mm, EB.3/NB.3/SL/SCT.3)

TKR5092 – Sway Bar (front, 2.0mm, EB.3/NB.3/SL/SCT.3)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

TKR5093 – Sway Bar (front, 2.1mm, EB.3/NB.3/SL/SCT.3)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

$4.99

$3.99

$4.99

$3.99

TKR5094 – Sway Bar (front, 2.7mm, EB.3/NB.3/SL/SCT.3) TKR5095 – Sway Bar (front, 2.9mm, EB.3/NB.3/SL/SCT.3)
TKR5094 – Sway Bar (front, 2.7mm, EB.3/NB.3/SL/SCT.3)TKR5095 – Sway Bar (front, 2.9mm, EB.3/NB.3/SL/SCT.3)

TKR5094 – Sway Bar (front, 2.7mm, EB.3/NB.3/SL/SCT.3)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

TKR5095 – Sway Bar (front, 2.9mm, EB.3/NB.3/SL/SCT.3)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

$4.99

$3.99

$4.99

$3.99

TKR5102 – Steering Posts (steel) TKR5112 – Differential Outdrives (center)
TKR5102 – Steering Posts (steel)TKR5112 – Differential Outdrives (center)

TKR5102 – Steering Posts (steel)

TKR5112 – Differential Outdrives (center)

$11.99

$9.89

$17.99

$14.79

TKR5114XB – Differential Outdrives (front/rear, revised,lightend TKR5116B – Wheel Nuts (T Logo, 17mm, serrated, gun metal anodize
TKR5114XB – Differential Outdrives (front/rear, revised,lightendTKR5116B – Wheel Nuts (T Logo, 17mm, serrated, gun metal anodize

TKR5114XB – Differential Outdrives (front/rear, revised, lightened) These outdrives feature a revised design, revised steel alloy and new heat treatment process to extend life and improve consistency run after run. We always strive to...

TKR5116B – Wheel Nuts (T Logo, 17mm, serrated, gun metal anodized, M12x1.0, 4pcs) Not only do these wheel nuts look good, they also protect your stub axles from getting packed with dirt and the axle end from damage when scuffed against...

$21.99

$19.79

$24.99

$20.49

TKR5116C – Wheel Nuts (RC Logo, 17mm, serrated, gun metal anodiz TKR5117 – Ackermann Plate (composite)
TKR5116C – Wheel Nuts (RC Logo, 17mm, serrated, gun metal anodizTKR5117 – Ackermann Plate (composite)

TKR5116C – Wheel Nuts (RC Logo, 17mm, serrated, gun metal anodized, M12x1.0, 4pcs) Not only do these wheel nuts look good, they also protect your stub axles from getting packed with dirt and the axle end from damage when scuffed against...

TKR5117 – Ackermann Plate (composite)

$24.99

$20.49

$7.99

$6.59

TKR5119 – Spur Gear (46T, hardened steel) TKR5149A – Differential Cross Pins (Aluminum, 6pcs)
TKR5119 – Spur Gear (46T, hardened steel)TKR5149A – Differential Cross Pins (Aluminum, 6pcs)

TKR5119 – Spur Gear (46T, hardened steel)

This is the updated stock spur gear for the NB48.3 and NT48.3.

TKR5149A – Differential Cross Pins (Aluminum, 6pcs, requires TKR5150 gears) These are the new pin design from TEKNO RC, these pins fit in the same differential case as the EB48 and SCT410. They do require the new differential gears TKR 5150...

$29.99

$25.99

$15.99

$13.29

TKR5149X – Differential Cross Pins (composite, for 3 complete) TKR5161 – V2 Adjustable Hinge Pin Brace “A” block, 7075 CNC, EB/
TKR5149X – Differential Cross Pins (composite, for 3 complete)TKR5161 – V2 Adjustable Hinge Pin Brace “A” block, 7075 CNC, EB/

TKR5149X – Differential Cross Pins (composite, for 3 complete diffs) This is a single lightweight composite differential cross pin for Tekno RC differentials. They are a direct replacement for TKR5149 and TKR5149A and come stock in the...

TKR5161 – V2 Adjustable Hinge Pin Brace “A” block, 7075 CNC, EB/NB/ET/NT/SCT) The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level. You are now able to independently...

$7.99

$6.99

$24.99

$21.99

(1)
TKR5162 – V2 Adjustable Hinge Pin Brace “B” block, 7075 CNC, EB/ TKR5163 – V2 Adjustable Hinge Pin Brace “C” block, 7075 CNC, EB/
TKR5162 – V2 Adjustable Hinge Pin Brace “B” block, 7075 CNC, EB/TKR5163 – V2 Adjustable Hinge Pin Brace “C” block, 7075 CNC, EB/

TKR5162 – V2 Adjustable Hinge Pin Brace “B” block, 7075 CNC, EB/NB/ET/NT/SCT) The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level. You are now able to independently...

TKR5163 – V2 Adjustable Hinge Pin Brace “C” block, 7075 CNC, EB/NB/ET/NT/SCT) The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level. You are now able to independently...

$24.99

$21.99

$24.99

$21.99

TKR5164 – V2 Adjustable Hinge Pin Brace “D” block, 7075 CNC, EB/ TKR5165 – V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCT
TKR5164 – V2 Adjustable Hinge Pin Brace “D” block, 7075 CNC, EB/TKR5165 – V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCT

TKR5164 – V2 Adjustable Hinge Pin Brace “D” block, 7075 CNC, EB/NB/ET/NT/SCT) The V2 adjustable hinge pin system brings tuning and adjustment on your Tekno RC vehicle to a whole new level. You are now able to independently...

TKR5165 – V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCT) These are the hinge pin inserts for use with TKR5161, TKR5162, TKR5163, and TKR5164. They are also used for TKR5730. They are standard on the SCT410.3 and EB48SL and are 100%...

$24.99

$21.99

$9.99

$8.49

TKR5166 – Front Bumper (revised, EB/NB/ET/NT) TKR5174 – Rear Arm Mud Guards (for TKR5184 & TKR5515, EB/NB/SCT)
TKR5166 – Front Bumper (revised, EB/NB/ET/NT)TKR5174 – Rear Arm Mud Guards (for TKR5184 & TKR5515, EB/NB/SCT)

TKR5166 – Front Bumper (revised, EB/NB/ET/NT) This bumper allows for more front ground clearance on your EB/NB/ET/NT48 vehicle as well as the EB48SL. By eliminating the bumper area under the chassis we have improved bump and jump handling...

TKR5174 – Rear Arm Mud Guards (for TKR5184 & TKR5515, EB/NB/SCT) This is a pair of rear arm mud guards to be used on the EB48SL. They are also an option for the SCT410.3. These are not compatible with the original EB/NB/SCT410.

$5.99

$5.48

$7.99

$6.99

TKR5181 – Low Profile Wing Mount & Body Mounts (EB48/NB48/EB48SL TKR5184 – Suspension Arms (rear, EB/NB48.3)
TKR5181 – Low Profile Wing Mount & Body Mounts (EB48/NB48/EB48SLTKR5184 – Suspension Arms (rear, EB/NB48.3)

TKR5181 – Low Profile Wing Mount & Body Mounts (EB48/NB48/EB48SL) This is a low profile wing mount with added wing position adjustability. The wing sits 18mm lower than before in the lowest position. This increases stability and lowers...

TKR5184 – Suspension Arms (rear, EB/NB48.3) These arms have a new design that shifts the shock mounting point out towards the wheel for added high speed stability. These are backwards compatible with the original EB/NB but must be used in...

$14.99

$12.99

$14.99

$12.99

TKR5187 – Rod Ends (straight, 6.8mm, EB/NB/ET/NT48, 8pcs) TKR5193 Spindles trailing,L/R,requires TKR5194,EB/NB/ET/NT/NEB.3
TKR5187 – Rod Ends (straight, 6.8mm, EB/NB/ET/NT48, 8pcs)TKR5193 Spindles trailing,L/R,requires TKR5194,EB/NB/ET/NT/NEB.3

TKR5187 – Rod Ends (straight, 6.8mm, EB/NB/ET/NT48, 8pcs)

TKR5193 – Spindles (trailing, L/R, requires TKR5194, EB/NB/ET/NT48, EB/NB.3) These spindles feature 8x16x5mm (TKRBB08165) outer bearings, 13x19x4mm (TKRBB13194) inner bearings. They can also be used with universal driveshafts by using...

$9.99

$8.49

$13.99

$11.98

(2)
TKR5194 – Spindle Carriers (trailing,15 degree, L/R, EB/NB/ET/NT TKR5199 – Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3)
TKR5194 – Spindle Carriers (trailing,15 degree, L/R, EB/NB/ET/NTTKR5199 – Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3)

TKR5194 – Spindle Carriers (trailing, 15 degree, L/R, EB/NB/ET/NT/EB.3/NB.3) The 15 degree spindle carriers are ideal for bumpy or blown out tracks. They provide more stability in low-bite conditions and make the vehicle easier to drive....

TKR5199 – Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3)

These are compatible with TKR5030XT, TKR5430, and TKR5184 arms.

$14.99

$12.99

(1)

$11.99

$10.28

TKR5199A – Aluminum Rear Hubs gun metal ano, EB/NB/ET/NT/NB/EB.3 TKR5199B – HRC Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48/48.3)
TKR5199A – Aluminum Rear Hubs gun metal ano, EB/NB/ET/NT/NB/EB.3TKR5199B – HRC Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48/48.3)

TKR5199A – Aluminum Rear Hubs (gun metal ano, EB/NB/ET/NT/EB.3/NB.3, 2pcs) These superbly machined rear hubs will add stability and strength to your vehicle. CNC machined from high quality aluminum then gun metal anodized for wear. They are...

TKR5199B – HRC Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3) By lowering the hinge pin location compared to the stock rear hubs (TKR5199), we have raised the rear roll center in just the right place. Use these hubs to increase on power...

$79.99

$67.99

$11.99

$10.79

TKR5206 – Brake Discs (fiberglass, 2pcs) TKR5214 – Brake Pads (steel, 4pcs)
TKR5206 – Brake Discs (fiberglass, 2pcs)TKR5214 – Brake Pads (steel, 4pcs)

TKR5206 – Brake Discs (fiberglass, 2pcs)

TKR5214 – Brake Pads (steel, 4pcs)

$7.99

$6.79

$11.99

$9.89

TKR5215B – Brake Cams (10° offset, steel, 2pcs) TKR5240 – Adjustable Hinge Pin Braces (front and rear, composite
TKR5215B – Brake Cams (10° offset, steel, 2pcs)TKR5240 – Adjustable Hinge Pin Braces (front and rear, composite

TKR5215B – Brake Cams (10° offset, steel, 2pcs) These brake cams will improve the braking response and feel on the NB and NT48 vehicles. They are also compatible with our EB/ET48 brake kits. The new cams feature a 10 degree offset that...

TKR5240 – Adjustable Hinge Pin Braces (front and rear, composite

$19.99

$16.39

$9.99

$8.19

TKR5251 – Aluminum Servo Horn (23t spline) TKR5251B – Aluminum Servo Horn (23T spline, M3 clamp,double hole
TKR5251 – Aluminum Servo Horn (23t spline)TKR5251B – Aluminum Servo Horn (23T spline, M3 clamp,double hole

TKR5251 – Aluminum Servo Horn (23t spline) For: Airtronics, JR, KO Servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom mount design that, as opposed to a top...

TKR5251B – Aluminum Servo Horn (23T spline, M3 clamp, double hole) For: Airtronics, JR, KO servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom mount design...

$14.99

$12.29

$15.99

$13.59

TKR5252B – Aluminum Servo Horn (24T spline, M3 clamp,double hole TKR5253B – Aluminum Servo Horn (25T spline, M3 clamp,double hole
TKR5252B – Aluminum Servo Horn (24T spline, M3 clamp,double holeTKR5253B – Aluminum Servo Horn (25T spline, M3 clamp,double hole

TKR5252B – Aluminum Servo Horn (24T spline, M3 clamp, double hole) For: Hitec servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom mount design that, as opposed...

TKR5253B – Aluminum Servo Horn (25T spline, M3 clamp, double hole) For: Futaba, Pro-Tek, Savox, Highest servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom...

$15.99

$13.59

$15.99

$13.59

(3)
TKR5268–Shock Tower (front,7075 CNC,gun metal anodized,EBNB48.3 TKR5269–Shock Tower(rear, 7075 CNC,gun metal anodized, EB/NB48.3
TKR5268–Shock Tower (front,7075 CNC,gun metal anodized,EBNB48.3TKR5269–Shock Tower(rear, 7075 CNC,gun metal anodized, EB/NB48.3

TKR5268 – Shock Tower (front, 7075 CNC, gun metal anodized, EB48.3/NB48.3)

6mm thick.

TKR5269 – Shock Tower (rear, 7075 CNC, gun metal anodized, EB48.3/NB48.3)

7075 CNC machined 5mm thick rear tower for the EB and NB48.3.

$39.99

$33.99

$39.99

$33.99

TKR5286 – Suspension Arms (front, EB/NB48.3) TKR5287 Universal Driveshafts (front/rear hardened steel EB/NB.3
TKR5286 – Suspension Arms (front, EB/NB48.3)TKR5287 Universal Driveshafts (front/rear hardened steel EB/NB.3

TKR5286 – Suspension Arms (front, EB/NB48.3) These arms have a new design that shifts the shock mounting point out towards the wheel for added high speed stability. These are backwards compatible with the original EB/NB but must be used in...

TKR5287 – Universal Driveshafts (front/rear, hardened steel, EB/NB48.3, 2pcs) Universal driveshafts are now available for use on your NB48.3 and EB48.3 1/8th buggies. The driveshaft assemblies are CNC machined from high quality steel alloy...

$14.99

$12.99

$49.99

$42.99

TKR5295 – Universal Driveshaft (center, rear, 111mm, NB48/NB48.3 TKR5296–Universal Driveshaft (center, front, 90.5mm, NB48/NB48.3
TKR5295 – Universal Driveshaft (center, rear, 111mm, NB48/NB48.3TKR5296–Universal Driveshaft (center, front, 90.5mm, NB48/NB48.3
TKR5295 – Universal Driveshaft (center, rear, 111mm, NB48/NB48.3) Center universal driveshafts are now available for your NB48 and NB48.3. Universal driveshafts will smooth out front/rear power transfer and increase brake response by...TKR5296 – Universal Driveshaft (center, front, 90.5mm, NB48/NB48.3/NT48/NT48.3) Center universal driveshafts are now available for your NB48/48.3 and NT48/48.3. Universal driveshafts will smooth out front/rear power transfer and increase...

$24.99

$22.49

$24.99

$22.49

TKR5314B – Brake Pad Set (semi-metalic, NB/NT, 2pcs) TKR5336B – Throttle, Brake Linkage (revised, NB48, NT48)
TKR5314B – Brake Pad Set (semi-metalic, NB/NT, 2pcs)TKR5336B – Throttle, Brake Linkage (revised, NB48, NT48)

TKR5314B – Brake Pad Set (semi-metalic, NB/NT, NB.3/NT.3, 2pcs) These brake pads provide the strongest and most consistent braking action available for your NB48 and NT48. They are backwards compatible with all NB/NT models. The...

TKR5336B – Throttle, Brake Linkage (revised, NB48, NT48) The NB48.3 linkage improves consistency and eases brake bias adjustment. This is an awesome upgrade for the original NB and NT48 and comes stock on the NB48.3. Compatible with all...

$19.99

$16.98

$17.99

$15.29

TKR5340C – Fuel Tank (w/ clunk, NB48, IFMAR legal) TKR5340HW – Fuel Tank Hardware (fits: TKR5340C & TKR5440C)
TKR5340C – Fuel Tank (w/ clunk, NB48, IFMAR legal)TKR5340HW – Fuel Tank Hardware (fits: TKR5340C & TKR5440C)

TKR5340C – Fuel Tank (w/ clunk, NB48/48.3, IFMAR legal) Fuel tank features: Now IFMAR/EFRA legal without any modification Fuel nipple added to prevent the fuel line / clunk assembly from moving in/out of the tank Added material around...

TKR5340HW – Fuel Tank Hardware (fits: TKR5340C & TKR5440C)

$24.99

$21.99

$3.99

$3.39

TKR5345B – Brake Disc Set (hardened steel, NB/NT, 1pc) TKR5368 – Brake Pad Disengagement Springs (NB/NT, 4pcs)
TKR5345B – Brake Disc Set (hardened steel, NB/NT, 1pc)TKR5368 – Brake Pad Disengagement Springs (NB/NT, 4pcs)

TKR5345B – Brake Disc Set (hardened steel, NB/NT, 1pc)

Fully CNC machined, then hardened for strength, then ground for flatness, then coated for wear.  This is the highest quality brake disc available.

TKR5368 – Brake Pad Disengagement Springs (NB/NT, 4pcs)

These will keep your brake pads disengaged while on throttle.  They are compatible with all NB48 and NT48 models and all brake linkages and configurations.

$13.99

$11.89

$2.99

$2.49

TKR5376A – Driveshaft (center, rear, aluminum, NB48) TKR5377A – Driveshaft (center, front, aluminum, NB48, NT48)
TKR5376A – Driveshaft (center, rear, aluminum, NB48)TKR5377A – Driveshaft (center, front, aluminum, NB48, NT48)

TKR5376A – Driveshaft (center, rear, aluminum, NB48)

TKR5377A – Driveshaft (center, front, aluminum, NB48, NT48)

$14.99

$12.29

$14.99

$12.29

TKR5447B – Complete Center Differential (46t, NB48.3/NT48.3) TKR5790 – Bearing Sleeve Set (use 8x14x4mm in place of 8x16x5mm
TKR5447B – Complete Center Differential (46t, NB48.3/NT48.3)TKR5790 – Bearing Sleeve Set (use 8x14x4mm in place of 8x16x5mm

TKR5447B – Complete Center Differential (46t, NB48.3/NT48.3) Includes: (2x) M2.5×9.8mm pins for outdrives (2x) TKR5112X – Differential Outdrives (2pcs) (1x) TKR5143 – diff seal (2x) TKR5144 – diff o-rings (2x)...

Product Description TKR5790 – Bearing Sleeve Set (use 8x14x4mm in place of 8x16x5mm bearing, 6pcs) In RC, every gram counts. A lighter vehicle will corner faster and accelerate faster. Saving grams can be expensive at times. But not...

$64.99

$54.98

$6.99

$6.29

TKR6003B – Non-Vented Shock Caps (aluminum, gun metal anodized, TKR6004T – Shock Shafts w/ TiNi Coating (front, steel, 2pcs)
TKR6003B – Non-Vented Shock Caps (aluminum, gun metal anodized, TKR6004T – Shock Shafts w/ TiNi Coating (front, steel, 2pcs)

TKR6003B – Non-Vented Shock Caps (aluminum, gun metal anodized, 2pcs)

TKR6004T – Shock Shafts w/ TiNi Coating (front, steel, 2pcs)

$19.99

$16.39

$19.99

$16.39

TKR6017T – Shock Shafts w/ TiNi Coating (truggys front/buggys & TKR6018 – Shock Cap and Spring Adjustment Nuts (composite, for 2
TKR6017T – Shock Shafts w/ TiNi Coating (truggys front/buggys & TKR6018 – Shock Cap and Spring Adjustment Nuts (composite, for 2

TKR6017T – Shock Shafts w/ TiNi Coating (truggys front/buggys & SCT rear, steel, 2pcs)

TKR6018 – Shock Cap and Spring Adjustment Nuts (composite, for 2 shocks) These Shock caps are the all in one cap for the EB48* and SCT410, they are capable of being used for standard build of shocks with the bleeder hole on the side,...

$19.99

$16.39

$9.99

$8.19

TKR6030 – Shock Spring Set (rear, 1.4×11.0T, 85mm, pink) TKR6031 – Shock Spring Set (rear, 1.4×10.5T, 85mm, green)
TKR6030 – Shock Spring Set (rear, 1.4×11.0T, 85mm, pink)TKR6031 – Shock Spring Set (rear, 1.4×10.5T, 85mm, green)

TKR6030 – Shock Spring Set (rear, 1.4×11.0T, 85mm, pink)

TKR6031 – Shock Spring Set (rear, 1.4×10.5T, 85mm, green)

$9.99

$8.19

$9.99

$8.19

TKR6032 – Shock Spring Set (rear, 1.4×10.0T, 85mm, yellow) TKR6033 – Shock Spring Set (rear, 1.4×9.5T, 85mm, orange)
TKR6032 – Shock Spring Set (rear, 1.4×10.0T, 85mm, yellow)TKR6033 – Shock Spring Set (rear, 1.4×9.5T, 85mm, orange)

TKR6032 – Shock Spring Set (rear, 1.4×10.0T, 85mm, yellow)

TKR6033 – Shock Spring Set (rear, 1.4×9.5T, 85mm, orange)

$9.99

$8.19

$9.99

$8.19

TKR6034 – Shock Spring Set (rear, 1.4×9.0T, 85mm, red) TKR6035 – Shock Spring Set (front, 1.5×9.0T, 70mm, pink)
TKR6034 – Shock Spring Set (rear, 1.4×9.0T, 85mm, red)TKR6035 – Shock Spring Set (front, 1.5×9.0T, 70mm, pink)

TKR6034 – Shock Spring Set (rear, 1.4×9.0T, 85mm, red)

TKR6035 – Shock Spring Set (front, 1.5×9.0T, 70mm, pink)

$9.99

$8.19

$9.99

$8.19

TKR6036 – Shock Spring Set (front, 1.5×8.5T, 70mm, green) TKR6037 – Shock Spring Set (front, 1.5×8.0T, 70mm, yellow)
TKR6036 – Shock Spring Set (front, 1.5×8.5T, 70mm, green)TKR6037 – Shock Spring Set (front, 1.5×8.0T, 70mm, yellow)

TKR6036 – Shock Spring Set (front, 1.5×8.5T, 70mm, green)

TKR6037 – Shock Spring Set (front, 1.5×8.0T, 70mm, yellow)

$9.99

$8.19

$9.99

$8.19

TKR6038 – Shock Spring Set (front, 1.5×7.5T, 70mm, orange) TKR6039 – Shock Spring Set (front, 1.5×7.0T, 70mm, red)
TKR6038 – Shock Spring Set (front, 1.5×7.5T, 70mm, orange)TKR6039 – Shock Spring Set (front, 1.5×7.0T, 70mm, red)

TKR6038 – Shock Spring Set (front, 1.5×7.5T, 70mm, orange)

 

 

TKR6039 – Shock Spring Set (front, 1.5×7.0T, 70mm, red)

$9.99

$8.19

$9.99

$8.19

TKR6041 – Shock Spring Set (rear, 1.4×12.5T, 80mm, white) TKR6042 – Shock Spring Set (rear, 1.4×12.0T, 80mm, grey)
TKR6041 – Shock Spring Set (rear, 1.4×12.5T, 80mm, white)TKR6042 – Shock Spring Set (rear, 1.4×12.0T, 80mm, grey)

TKR6041 – Shock Spring Set (rear, 1.4×12.5T, 80mm, white)

TKR6042 – Shock Spring Set (rear, 1.4×12.0T, 80mm, grey)

$9.99

$8.19

$9.99

$8.19

TKR6043 – Shock Spring Set (rear, 1.4×11.5T, 80mm, black) TKR6046 – Shock Spring Set (front, 1.5×10.5T, 65mm, white)
TKR6043 – Shock Spring Set (rear, 1.4×11.5T, 80mm, black)TKR6046 – Shock Spring Set (front, 1.5×10.5T, 65mm, white)

TKR6043 – Shock Spring Set (rear, 1.4×11.5T, 80mm, black)

TKR6046 – Shock Spring Set (front, 1.5×10.5T, 65mm, white)

$9.99

$8.19

$9.99

$8.19

TKR6047 – Shock Spring Set (front, 1.5×10.0T, 65mm, grey) TKR6048 – Shock Spring Set (front, 1.5×9.5T, 65mm, black)
TKR6047 – Shock Spring Set (front, 1.5×10.0T, 65mm, grey)TKR6048 – Shock Spring Set (front, 1.5×9.5T, 65mm, black)

TKR6047 – Shock Spring Set (front, 1.5×10.0T, 65mm, grey)

TKR6048 – Shock Spring Set (front, 1.5×9.5T, 65mm, black)

$9.99

$8.19

$9.99

$8.19

TKR6050 – Shock Pistons (CNC, conical, 10×1.1) TKR6055 – Shock Spring Set (rear, 1.4×8.5T, 80mm, blue)
TKR6050 – Shock Pistons (CNC, conical, 10×1.1)TKR6055 – Shock Spring Set (rear, 1.4×8.5T, 80mm, blue)

TKR6050 – Shock Pistons (CNC, conical, 10×1.1)

Made from self lubricating POM material and with our exclusive cone shape, these CNC pistons have 10 1.1mm holes and are machined to perfection.

TKR6055 – Shock Spring Set (rear, 1.4×8.5T, 80mm, blue)

$24.99

$20.49

$9.99

$8.19

TKR6056 – Shock Spring Set (rear, 1.4×8.0T, 80mm, purple) TKR6063 – Shock Pistons (CNC, conical, 6×1.5, 10.6mm²)
TKR6056 – Shock Spring Set (rear, 1.4×8.0T, 80mm, purple)TKR6063 – Shock Pistons (CNC, conical, 6×1.5, 10.6mm²)

TKR6056 – Shock Spring Set (rear, 1.4×8.0T, 80mm, purple)

TKR6063 – Shock Pistons (CNC, conical, 6×1.5, 10.6mm²) Made from self lubricating POM material and with our exclusive cone shape, these CNC pistons have (6) 1.5mm holes and are machined to perfection.

$9.99

$8.19

$24.99

$20.49

(1)
TKR6064 – Shock Pistons (CNC, conical, 6×1.6, 12.1mm²) TKR6065 – Shock Piston Blanks (CNC, conical, 16 dimples, 16mm)
TKR6064 – Shock Pistons (CNC, conical, 6×1.6, 12.1mm²)TKR6065 – Shock Piston Blanks (CNC, conical, 16 dimples, 16mm)

TKR6064 – Shock Pistons (CNC, conical, 6×1.6, 12.1mm²) Made from self lubricating POM material and with our exclusive cone shape, these CNC pistons have (6) 1.6mm holes and are machined to perfection.

TKR6065 – Shock Piston Blanks (CNC, conical, 16 dimples, 16mm) Made from self lubricating Delrin material with our exclusive conical design, these CNC pistons have 16 dimples to help you create custom pistons easily and are machined to...

$24.99

$20.49

$24.99

$20.49

TKR6140 – Locking Shock Rod Ends and Spring Perch Set (All cars) TKR6140B – Locking Shock Rod End and Tall Spring Perch Set
TKR6140 – Locking Shock Rod Ends and Spring Perch Set (All cars)TKR6140B – Locking Shock Rod End and Tall Spring Perch Set

TKR6140 – Locking Shock Rod Ends and Spring Perch Set (EB/NB/ET/NT/SCT) Never lose a shock spring again with these locking shock spring perches and rod ends. An all new design that mates up perfectly with our durable new captured shock...

Product Description TKR6140B – Locking Shock Rod End and Spring Perch Set (revised, 16mm shocks) Feel confident your vehicle’s suspension will remain consistent over long mains with our new extended length spring perch. These locking...

$11.99

$10.59

$11.99

$10.79