3.5mm SUPER DUTY Titanium Turnbuckle Set for Tekno EB410
The Lunsford Touch:
- Always and only domestic Grade 5 titanium
- Nano accurate threading process
- Machined from center-less ground titanium
- Manufactured right here at the Lunsford compound
4 - 3.5mm x 40mm SUPER DUTY Titanium Turnbuckles (Front Camber & Steering)
2 - 3.5mm x 55mm SUPER DUTY Titanium Turnbuckles (Rear Camber)
1 - 1/8" Drill Bit.
1 - Super cool Lunsford decal
Note from Kelly: These turnbuckles are 0.5mm larger in diameter than stock adding increased strength. You will need to use the included 1/8" drill bit to enlarge the Tekno Rod End to accept the 3.5mm SUPER DUTY Turnbuckles. Use a paper clip to measure the depth of the ball end and then mark the drill bit accordingly. We recommend drilling by hand but can also be done with a drill that has a very linear trigger. Safe use of power tools is highly recommended.
Customers Also Bought