ET48.3 Option Parts

 
1 - 112 of 112 items
Sort By:
1/8 XL WING BUTTONS, TITANIUM (2) Assassin body (clear) for Tekno ET48-ET48.3
1/8 XL WING BUTTONS, TITANIUM (2)Assassin body (clear) for Tekno ET48-ET48.3

New 1/8 buggy sized genuine titanium wing buttons! Heavy duty polished and laser etched wing buttons for bolt on buggy wing mounts. Extra large 22mm diameter and thicker than 1/10 buttons to securely hold your wing while offering protection from...

Assassin body (clear) for Tekno ET48-ET48.3

$13.95

$12.96

$40.00

$31.98

Fin, 1/8th Serrated Light-weight Wheel Nut Black Fin, 1/8th Serrated Light-weight Wheel Nut Blue
Fin, 1/8th Serrated Light-weight Wheel Nut BlackFin, 1/8th Serrated Light-weight Wheel Nut Blue

When competitive racing hits the boiling point, everyone reaches for light-weight items. JConcepts has the answer with the introduction of the Fin styled light-weight 17mm fine thread wheel nut set. These high precision wheel nuts are flanged and...

When competitive racing hits the boiling point, everyone reaches for light-weight items. JConcepts has the answer with the introduction of the Fin styled light-weight 17mm fine thread wheel nut set. These high precision wheel nuts are flanged and...

$30.00

$25.98

$30.00

$25.98

FRC Custom Tekno ET48-ET48.3 Chassis Protector Gamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 HIGH
FRC Custom Tekno ET48-ET48.3 Chassis Protector Gamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 HIGH

 Buy two or more they are $15.99ea These are 18 MIL custom chassis protectors that will fit the Tekno ET48-ET48.3. These protectors were used and put to the ultimate test at...

HIGH PACK Pair of (2) VRP 'Gamechanger' Pistons - 8H1.6/1.3mm For Tekno NB48.3/EB48.3 as tested by Ryan Lutz The (4) Exposed Main Holes are 1.6mm with the (4) Valved holes at 1.3mm

$19.99

$17.98

(1)

$32.50

$28.49

Gamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 Low P Gamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 MED P
Gamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 Low PGamechanger Pistons 8 Hole1.6/1.3mm-for Tekno/KYO/Xray 1/8 MED P

LOW PACK Pair of (2) VRP 'Gamechanger' Pistons - 8H1.6/1.3mm For Tekno NB48.3/EB48.3 as tested by Ryan Lutz The (4) Exposed Main Holes are 1.6mm with the (4) Valved holes at 1.3mm

MED PACK Pair of (2) VRP 'Gamechanger' Pistons - 8H1.6/1.3mm For Tekno NB48.3/EB48.3 as tested by Ryan Lutz The (4) Exposed Main Holes are 1.6mm with the (4) Valved holes at 1.3mm

$32.50

$28.49

$32.50

$28.49

Illuzion - 1/8th Wheel Nuts (fine thread) Black Illuzion - 1/8th Wheel Nuts (fine thread) Blue
Illuzion - 1/8th Wheel Nuts (fine thread) BlackIlluzion - 1/8th Wheel Nuts (fine thread) Blue

JConcepts has your 1/8th buggy or truck, locking wheel nut needs covered with the 17mm fine thread capped wheel nut set. These high precision wheel nuts are flanged and knurled for locking security and feature a closed end to protect from dirt...

JConcepts has your 1/8th buggy or truck, locking wheel nut needs covered with the 17mm fine thread capped wheel nut set. These high precision wheel nuts are flanged and knurled for locking security and feature a closed end to protect from dirt...

$22.00

$18.99

$22.00

$18.99

TKR1103 – Turnbuckle Wrench (4mm, 5mm, hardened steel) TKR1115 – Pivot Ball and Shock Multi-tool (aluminum)
TKR1103 – Turnbuckle Wrench (4mm, 5mm, hardened steel)TKR1115 – Pivot Ball and Shock Multi-tool (aluminum)

TKR1103 – Turnbuckle Wrench (4mm, 5mm, hardened steel) How do you improve on a simple turnbuckle wrench? The current crop of aluminum turnbuckle wrenches just aren’t cutting it in terms of durability. They wear out easily and are...

TKR1115 – Multi-Purpose Shock/Ball End Tool (shock shafts, shock caps, ball ends) Our new innovative shock/ball end tool is going to change the way you look at working on your RC vehicle. It incorporates many extremely useful features into...

$14.99

$12.29

(1)

$39.99

$33.99

(1)
TKR1119 – Wrench (5.5mm / 7.0mm, hardened steel) TKR1121 – Pit Mat (Tekno RC logo, dark blue, 2’x4′)
TKR1119 – Wrench (5.5mm / 7.0mm, hardened steel)TKR1121 – Pit Mat (Tekno RC logo, dark blue, 2’x4′)

TKR1119 – Wrench (5.5mm / 7.0mm, hardened steel) The Tekno RC tool product line is expanding. This dual ended tool is perfect for any application requiring a 5.5mm (M3 nut) or 7mm (M4 nut) wrench. It is compact and extremely durable so it...

TKR1121 – Pit Mat (Tekno RC logo, dark blue, 2’x4′)

$14.99

$12.29

$24.99

$20.98

(1)
TKR1235 – Body Clips (angled, 10pcs) TKR1250 – Steering Link Screws (black, steel, 2pcs)
TKR1235 – Body Clips (angled, 10pcs)TKR1250 – Steering Link Screws (black, steel, 2pcs)

TKR1235 – Body Clips (angled, 10pcs)

Product Description

TKR1250 – Steering Link Screws (black, steel, 2pcs)

$3.99

$3.59

(1)

$2.99

$2.69

TKR1403 – M3x10mm Button Head Screws (black, 10pcs) TKR4106–Brushless Motor Wire Guide Set 10,12,or 13 gauge 2 pair
TKR1403 – M3x10mm Button Head Screws (black, 10pcs)TKR4106–Brushless Motor Wire Guide Set 10,12,or 13 gauge 2 pair

Product Description

TKR1403 – M3x10mm Button Head Screws (black, 10pcs)

These screws are for the new stamped ackermann plate (TKR8100).

Product Description Tired of your brushless motor wires getting in the way? You need to keep them in line and this is the product to do it. Safely and neatly route your wires out of harm’s way. These might be the best things to come along...

$3.99

$3.59

$5.99

$5.39

TKR4175 – M5 Pinion Gear (15t, MOD1, 5mm bore, M5 set screw) TKR4176 – M5 Pinion Gear (16t, MOD1, 5mm bore, M5 set screw)
TKR4175 – M5 Pinion Gear (15t, MOD1, 5mm bore, M5 set screw)TKR4176 – M5 Pinion Gear (16t, MOD1, 5mm bore, M5 set screw)

The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or...

The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or...

$11.99

$9.99

$11.99

$9.99

TKR4177 – M5 Pinion Gear (17t, MOD1, 5mm bore, M5 set screw) TKR4178 – M5 Pinion Gear (18t, MOD1, 5mm bore, M5 set screw)
TKR4177 – M5 Pinion Gear (17t, MOD1, 5mm bore, M5 set screw)TKR4178 – M5 Pinion Gear (18t, MOD1, 5mm bore, M5 set screw)

Product Description The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear...

The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or...

$11.99

$9.99

$11.99

$9.99

TKR4179 – M5 Pinion Gear (19t, MOD1, 5mm bore, M5 set screw) TKR4180 – M5 Pinion Gear (20t, MOD1, 5mm bore, M5 set screw)
TKR4179 – M5 Pinion Gear (19t, MOD1, 5mm bore, M5 set screw)TKR4180 – M5 Pinion Gear (20t, MOD1, 5mm bore, M5 set screw)

The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or...

The new line of Tekno RC M5 Pinion Gears stand out from the rest. These are the ultimate pinions for 1/8th Electric and any other MOD1 pinion application. Sized from 11t all the way to 30t, you are sure to find the right gear ratio for racing or...

$11.99

$9.99

$11.99

$9.99

TKR5051 – Rod Ends (6.8mm, camber links, 8pcs) TKR5060C – Steering Servo Brace (carbon fiber)
TKR5051 – Rod Ends (6.8mm, camber links, 8pcs)TKR5060C – Steering Servo Brace (carbon fiber)

TKR5051 – Rod Ends (6.8mm, camber links, 8pcs)

TKR5060C – Steering Servo Brace (carbon fiber)

$9.99

$8.19

$14.99

$12.29

TKR5070A – Stub Axles (aluminum, 2pcs) TKR5071B – Wheel Hubs (17mm, lightened, aluminum, gun metal ano,
TKR5070A – Stub Axles (aluminum, 2pcs)TKR5071B – Wheel Hubs (17mm, lightened, aluminum, gun metal ano,

The Tekno RC Aluminum Stub Axles are designed to reduce rotating mass as well as unsprung weight without sacrificing strength or durability. After undergoing several months of race proven testing, they meet our high...

TKR5071B – Wheel Hubs (17mm, lightened, aluminum, gun metal ano, 1mm offset, w/pins, 2pcs) These 17mm Wheel Hubs increase the track width of your EB48 by 1mm, this increases stability and cornering. These are still ROAR legal when used on...

$24.99

$21.99

$14.99

$12.29

TKR5071C – Wheel Hubs (17mm, lightened, aluminum, gun metal ano, TKR5114XB – Differential Outdrives (front/rear, revised,lightend
TKR5071C – Wheel Hubs (17mm, lightened, aluminum, gun metal ano,TKR5114XB – Differential Outdrives (front/rear, revised,lightend

TKR5071C – Wheel Hubs (17mm, lightened, aluminum, gun metal ano, 2mm offset, w/pins, 2pcs) These 17mm Wheel Hubs increase the track width of your EB48 by 2mm, this increases stability and cornering. These are still ROAR legal when used on...

TKR5114XB – Differential Outdrives (front/rear, revised, lightened) These outdrives feature a revised design, revised steel alloy and new heat treatment process to extend life and improve consistency run after run. We always strive to...

$14.99

$12.29

$21.99

$19.79

TKR5115 – Spur Gear (44T, hardened steel, lightened) TKR5116B – Wheel Nuts (T Logo, 17mm, serrated, gun metal anodize
TKR5115 – Spur Gear (44T, hardened steel, lightened)TKR5116B – Wheel Nuts (T Logo, 17mm, serrated, gun metal anodize

TKR5115 – Spur Gear (44T, hardened steel, lightened) Worried about stripping your plastic spur gear? Well we have got you covered. This Hardened steel spur will never get dirt or small pebbles in bedded in it like its plastic counter part....

TKR5116B – Wheel Nuts (T Logo, 17mm, serrated, gun metal anodized, M12x1.0, 4pcs) Not only do these wheel nuts look good, they also protect your stub axles from getting packed with dirt and the axle end from damage when scuffed against...

$29.99

$24.59

$24.99

$20.49

TKR5116C – Wheel Nuts (RC Logo, 17mm, serrated, gun metal anodiz TKR5117 – Ackermann Plate (composite)
TKR5116C – Wheel Nuts (RC Logo, 17mm, serrated, gun metal anodizTKR5117 – Ackermann Plate (composite)

TKR5116C – Wheel Nuts (RC Logo, 17mm, serrated, gun metal anodized, M12x1.0, 4pcs) Not only do these wheel nuts look good, they also protect your stub axles from getting packed with dirt and the axle end from damage when scuffed against...

TKR5117 – Ackermann Plate (composite)

$24.99

$20.49

$7.99

$6.59

TKR5119 – Spur Gear (46T, hardened steel) TKR5149A – Differential Cross Pins (Aluminum, 6pcs)
TKR5119 – Spur Gear (46T, hardened steel)TKR5149A – Differential Cross Pins (Aluminum, 6pcs)

TKR5119 – Spur Gear (46T, hardened steel)

This is the updated stock spur gear for the NB48.3 and NT48.3.

TKR5149A – Differential Cross Pins (Aluminum, 6pcs, requires TKR5150 gears) These are the new pin design from TEKNO RC, these pins fit in the same differential case as the EB48 and SCT410. They do require the new differential gears TKR 5150...

$29.99

$25.99

$15.99

$13.29

TKR5199A – Aluminum Rear Hubs gun metal ano, EB/NB/ET/NT/NB/EB.3 TKR5199B – HRC Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48/48.3)
TKR5199A – Aluminum Rear Hubs gun metal ano, EB/NB/ET/NT/NB/EB.3TKR5199B – HRC Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48/48.3)

TKR5199A – Aluminum Rear Hubs (gun metal ano, EB/NB/ET/NT/EB.3/NB.3, 2pcs) These superbly machined rear hubs will add stability and strength to your vehicle. CNC machined from high quality aluminum then gun metal anodized for wear. They are...

TKR5199B – HRC Rear Hubs (L/R, CV or uni, EB/NB/ET/NT48, EB/NB.3) By lowering the hinge pin location compared to the stock rear hubs (TKR5199), we have raised the rear roll center in just the right place. Use these hubs to increase on power...

$79.99

$67.99

$11.99

$10.79

TKR5210 – Center Diff Motor Mount (aluminum, gun metal anodized) TKR5211X – Motor Mount Insert (aluminum, gun metal anodized, lig
TKR5210 – Center Diff Motor Mount (aluminum, gun metal anodized)TKR5211X – Motor Mount Insert (aluminum, gun metal anodized, lig

TKR5210 – Center Diff Motor Mount (aluminum, gun metal anodized), This Center Diff mount is stock in the EB48 and has the brackets for the mechanical brakes unlike TKR5210x. This mount is needed run mechanical brakes on the SCT410(combined...

TKR5211X – Motor Mount Insert (aluminum, gun metal anodized, lightened) Lighten your EB48 or SCT410 up with this CNC Motor mount insert, this insert is 5 grams lighter than the stock insert.

$39.99

$32.79

$24.99

$20.49

TKR5217 – Center Diff Rear Support (aluminum, gun metal anodized TKR5237 – Spur Gear (44t, composite)
TKR5217 – Center Diff Rear Support (aluminum, gun metal anodizedTKR5237 – Spur Gear (44t, composite)

TKR5217 – Center Diff Rear Support (aluminum, gun metal anodized)

TKR5237 – Spur Gear (44t, composite)

$29.99

$24.59

$7.99

$6.59

TKR5251 – Aluminum Servo Horn (23t spline) TKR5251B – Aluminum Servo Horn (23T spline, M3 clamp,double hole
TKR5251 – Aluminum Servo Horn (23t spline)TKR5251B – Aluminum Servo Horn (23T spline, M3 clamp,double hole

TKR5251 – Aluminum Servo Horn (23t spline) For: Airtronics, JR, KO Servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom mount design that, as opposed to a top...

TKR5251B – Aluminum Servo Horn (23T spline, M3 clamp, double hole) For: Airtronics, JR, KO servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom mount design...

$14.99

$12.29

$15.99

$13.59

TKR5253B – Aluminum Servo Horn (25T spline, M3 clamp,double hole TKR5261 – Split Center Diff Motor Mount (complete, CNC 7075, gun
TKR5253B – Aluminum Servo Horn (25T spline, M3 clamp,double holeTKR5261 – Split Center Diff Motor Mount (complete, CNC 7075, gun

TKR5253B – Aluminum Servo Horn (25T spline, M3 clamp, double hole) For: Futaba, Pro-Tek, Savox, Highest servos The Tekno RC Aluminum Servo Horns were designed to minimize forces transmitted back to the servo spline. It utilizes a bottom...

TKR5261 – Split Center Diff Motor Mount (complete, CNC 7075, gun metal, EB/ET/SCT) The CNC machined split center differential mount makes maintenance on the center differential of your vehicle a breeze. Machined from 7075 aluminum, then gun...

$15.99

$13.59

(3)

$79.99

$64.99

TKR5262 – CNC Split Cntr Diff Mount (diff mounts only, 7075, gun TKR5298–Universal Driveshaft Set(front/rear,140mm, N&ET48/ET48.3
TKR5262 – CNC Split Cntr Diff Mount (diff mounts only, 7075, gunTKR5298–Universal Driveshaft Set(front/rear,140mm, N&ET48/ET48.3

TKR5262 – CNC Split Cntr Diff Mount (diff mounts only, 7075, gun metal ano, EB/ET/SCT) This is the aluminum upgrade to the TKR5263 composite parts that come standard in the SCT410.3 and EB48SL. If you already have the TKR5260 split diff...

TKR5298 – Universal Driveshaft Set (front/rear, 140mm, ET48.3/NT48.3) Universal driveshafts are now available for the acclaimed ET48.3 and NT48.3 1/8th truggies. The driveshaft assemblies are CNC machined from high-quality steel alloy and...

$47.99

$40.99

$59.99

$53.99

TKR5433 – Rear Arm Guards (ET48, NT48) TKR5480 – Sway Bar (front, 2.3mm, ET48, NT48)
TKR5433 – Rear Arm Guards (ET48, NT48)TKR5480 – Sway Bar (front, 2.3mm, ET48, NT48)

TKR5433 – Rear Arm Guards (ET48, NT48)

TKR5480 – Sway Bar (front, 2.3mm, ET48, NT48)

$5.99

$4.99

$5.99

$4.99

TKR5481 – Sway Bar (front, 2.4mm, ET48, NT48) TKR5482 – Sway Bar (front, 2.5mm, ET48, NT48)
TKR5481 – Sway Bar (front, 2.4mm, ET48, NT48)TKR5482 – Sway Bar (front, 2.5mm, ET48, NT48)

TKR5481 – Sway Bar (front, 2.4mm, ET48, NT48)

TKR5482 – Sway Bar (front, 2.5mm, ET48, NT48)

$5.99

$4.99

$5.99

$4.99

TKR5483 – Sway Bar (front, 2.6mm, ET48, NT48) TKR5484 – Sway Bar (front, 2.8mm, ET48, NT48)
TKR5483 – Sway Bar (front, 2.6mm, ET48, NT48)TKR5484 – Sway Bar (front, 2.8mm, ET48, NT48)

TKR5483 – Sway Bar (front, 2.6mm, ET48, NT48)

TKR5484 – Sway Bar (front, 2.8mm, ET48, NT48)

$5.99

$4.99

$5.99

$4.99

TKR5485 – Sway Bar (front, 3.0mm, ET48, NT48) TKR5491 – Sway Bar (rear, 2.4mm, ET48, NT48)
TKR5485 – Sway Bar (front, 3.0mm, ET48, NT48)TKR5491 – Sway Bar (rear, 2.4mm, ET48, NT48)

TKR5485 – Sway Bar (front, 3.0mm, ET48, NT48)

TKR5491 – Sway Bar (rear, 2.4mm, ET48, NT48)

$5.99

$4.99

$5.99

$4.99

TKR5492 – Sway Bar (rear, 2.5mm, ET48, NT48) TKR5493 – Sway Bar (rear, 2.6mm, ET48, NT48)
TKR5492 – Sway Bar (rear, 2.5mm, ET48, NT48)TKR5493 – Sway Bar (rear, 2.6mm, ET48, NT48)

TKR5492 – Sway Bar (rear, 2.5mm, ET48, NT48)

TKR5493 – Sway Bar (rear, 2.6mm, ET48, NT48)

$5.99

$4.99

$5.99

$4.99

TKR5494 – Sway Bar (rear, 2.8mm, ET48, NT48) TKR5495 – Sway Bar (rear, 3.0mm, ET48, NT48)
TKR5494 – Sway Bar (rear, 2.8mm, ET48, NT48)TKR5495 – Sway Bar (rear, 3.0mm, ET48, NT48)

TKR5494 – Sway Bar (rear, 2.8mm, ET48, NT48)

TKR5495 – Sway Bar (rear, 3.0mm, ET48, NT48)

$5.99

$4.99

$5.99

$4.99

TKR5496 – Sway Bar (rear, 2.1mm, EB.3/NB.3/SL/SCT.3/ET/NT) TKR5497 – Sway Bar (rear, 2.2mm, EB.3/NB.3/SL/SCT.3/ET/NT)
TKR5496 – Sway Bar (rear, 2.1mm, EB.3/NB.3/SL/SCT.3/ET/NT)TKR5497 – Sway Bar (rear, 2.2mm, EB.3/NB.3/SL/SCT.3/ET/NT)

TKR5496 – Sway Bar (rear, 2.1mm, EB.3/NB.3/SL/SCT.3/ET/NT)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

TKR5497 – Sway Bar (rear, 2.2mm, EB.3/NB.3/SL/SCT.3/ET/NT)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

$5.99

$4.99

$5.99

$4.99

TKR5498 – Sway Bar (rear, 2.7mm, EB.3/NB.3/SL/SCT.3/ET/NT) TKR5499 – Sway Bar (rear, 2.9mm, EB.3/NB.3/SL/SCT.3/ET/NT)
TKR5498 – Sway Bar (rear, 2.7mm, EB.3/NB.3/SL/SCT.3/ET/NT)TKR5499 – Sway Bar (rear, 2.9mm, EB.3/NB.3/SL/SCT.3/ET/NT)

TKR5498 – Sway Bar (rear, 2.7mm, EB.3/NB.3/SL/SCT.3/ET/NT)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

TKR5499 – Sway Bar (rear, 2.9mm, EB.3/NB.3/SL/SCT.3/ET/NT)

Each bar is laser etched with the size.  (2.8mm bar shown for illustrative purposes)

$5.99

$4.99

$5.99

$4.99

TKR5617 – Decal/Sticker Sheet (ET48.3) TKR5676A – Driveshaft (center, rear, aluminum, ET48)
TKR5617 – Decal/Sticker Sheet (ET48.3)TKR5676A – Driveshaft (center, rear, aluminum, ET48)

TKR5617 – Decal/Sticker Sheet (ET48.3)

TKR5676A – Driveshaft (center, rear, aluminum, ET48)

$9.99

$8.49

$14.99

$12.29

TKR5790 – Bearing Sleeve Set (use 8x14x4mm in place of 8x16x5mm TKR6003B – Non-Vented Shock Caps (aluminum, gun metal anodized,
TKR5790 – Bearing Sleeve Set (use 8x14x4mm in place of 8x16x5mm TKR6003B – Non-Vented Shock Caps (aluminum, gun metal anodized,

Product Description TKR5790 – Bearing Sleeve Set (use 8x14x4mm in place of 8x16x5mm bearing, 6pcs) In RC, every gram counts. A lighter vehicle will corner faster and accelerate faster. Saving grams can be expensive at times. But not...

TKR6003B – Non-Vented Shock Caps (aluminum, gun metal anodized, 2pcs)

$6.99

$6.29

$19.99

$16.39

TKR6017T – Shock Shafts w/ TiNi Coating (truggys front/buggys & TKR6018 – Shock Cap and Spring Adjustment Nuts (composite, for 2
TKR6017T – Shock Shafts w/ TiNi Coating (truggys front/buggys & TKR6018 – Shock Cap and Spring Adjustment Nuts (composite, for 2

TKR6017T – Shock Shafts w/ TiNi Coating (truggys front/buggys & SCT rear, steel, 2pcs)

TKR6018 – Shock Cap and Spring Adjustment Nuts (composite, for 2 shocks) These Shock caps are the all in one cap for the EB48* and SCT410, they are capable of being used for standard build of shocks with the bleeder hole on the side,...

$19.99

$16.39

$9.99

$8.19

TKR6050 – Shock Pistons (CNC, conical, 10×1.1) TKR6051 – Shock Pistons (CNC, conical, 8×1.3)
TKR6050 – Shock Pistons (CNC, conical, 10×1.1)TKR6051 – Shock Pistons (CNC, conical, 8×1.3)

TKR6050 – Shock Pistons (CNC, conical, 10×1.1)

Made from self lubricating POM material and with our exclusive cone shape, these CNC pistons have 10 1.1mm holes and are machined to perfection.

1/2 set in stock, with a 1/2 set of 6053 TKR6051 – Shock Pistons (CNC, conical, 8×1.3) Made from self lubricating POM material and with our exclusive cone shape, these CNC pistons have 8 1.3mm holes and are machined to perfection.

$24.99

$20.49

$24.99

$20.49

TKR6061T – Shock Shafts w/ TiNi Coating (rear, x-long, steel, 2p TKR6063 – Shock Pistons (CNC, conical, 6×1.5, 10.6mm²)
TKR6061T – Shock Shafts w/ TiNi Coating (rear, x-long, steel, 2pTKR6063 – Shock Pistons (CNC, conical, 6×1.5, 10.6mm²)

TKR6061T – Shock Shafts w/ TiNi Coating (rear, x-long, steel, 2pcs)

TKR6063 – Shock Pistons (CNC, conical, 6×1.5, 10.6mm²) Made from self lubricating POM material and with our exclusive cone shape, these CNC pistons have (6) 1.5mm holes and are machined to perfection.

$24.99

$20.49

$24.99

$20.49

(1)
TKR6064 – Shock Pistons (CNC, conical, 6×1.6, 12.1mm²) TKR6065 – Shock Piston Blanks (CNC, conical, 16 dimples, 16mm)
TKR6064 – Shock Pistons (CNC, conical, 6×1.6, 12.1mm²)TKR6065 – Shock Piston Blanks (CNC, conical, 16 dimples, 16mm)

TKR6064 – Shock Pistons (CNC, conical, 6×1.6, 12.1mm²) Made from self lubricating POM material and with our exclusive cone shape, these CNC pistons have (6) 1.6mm holes and are machined to perfection.

TKR6065 – Shock Piston Blanks (CNC, conical, 16 dimples, 16mm) Made from self lubricating Delrin material with our exclusive conical design, these CNC pistons have 16 dimples to help you create custom pistons easily and are machined to...

$24.99

$20.49

$24.99

$20.49

TKR6080 – Shock Spring Set (rear, 1.6×10.5T, 90mm, pink, 3.96 lb TKR6081 – Shock Spring Set (rear, 1.6×10.0T, 90mm, green, 4.20 l
TKR6080 – Shock Spring Set (rear, 1.6×10.5T, 90mm, pink, 3.96 lbTKR6081 – Shock Spring Set (rear, 1.6×10.0T, 90mm, green, 4.20 l

TKR6080 – Shock Spring Set (rear, 1.6×10.5T, 90mm, pink, 3.96 lb/in)

TKR6081 – Shock Spring Set (rear, 1.6×10.0T, 90mm, green)

$11.99

$9.89

$11.99

$9.89

TKR6082 – Shock Spring Set (rear, 1.6×9.5T, 90mm, yellow, 4.48 l TKR6083 – Shock Spring Set (rear, 1.6×9.0T, 90mm, orange, 4.80 l
TKR6082 – Shock Spring Set (rear, 1.6×9.5T, 90mm, yellow, 4.48 lTKR6083 – Shock Spring Set (rear, 1.6×9.0T, 90mm, orange, 4.80 l

TKR6082 – Shock Spring Set (rear, 1.6×9.5T, 90mm, yellow, 4.48 lb/in)

TKR6083 – Shock Spring Set (rear, 1.6×9.0T, 90mm, orange, 4.80 lb/in)

$11.99

$9.89

$11.99

$9.89

TKR6090 – Shock Spring Set (front, 1.6×9.0T, 80mm, pink, 4.80 lb TKR6091 – Shock Spring Set (front, 1.6×8.5T, 80mm, green, 5.17 l
TKR6090 – Shock Spring Set (front, 1.6×9.0T, 80mm, pink, 4.80 lbTKR6091 – Shock Spring Set (front, 1.6×8.5T, 80mm, green, 5.17 l

TKR6090 – Shock Spring Set (front, 1.6×9.0T, 80mm, pink, 4.80 lb/in)

TKR6091 – Shock Spring Set (front, 1.6×8.5T, 80mm, green)

$11.99

$9.89

$11.99

$9.89

TKR6092 – Shock Spring Set (front, 1.6×8.0T, 80mm, yellow, 5.60 TKR6093 – Shock Spring Set (front, 1.6×7.5T, 80mm, orange, 6.11
TKR6092 – Shock Spring Set (front, 1.6×8.0T, 80mm, yellow, 5.60 TKR6093 – Shock Spring Set (front, 1.6×7.5T, 80mm, orange, 6.11

TKR6092 – Shock Spring Set (front, 1.6×8.0T, 80mm, yellow, 5.60 lb/in)

TKR6093 – Shock Spring Set (front, 1.6×7.5T, 80mm, orange, 6.11 lb/in)

$11.99

$9.89

$11.99

$9.89

TKR6140B – Locking Shock Rod End and Tall Spring Perch Set TKR6146 – Shock Cartridge Set (CNC, Delrin, EB/NB/ET/NT/SCT)
TKR6140B – Locking Shock Rod End and Tall Spring Perch Set TKR6146 – Shock Cartridge Set (CNC, Delrin, EB/NB/ET/NT/SCT)

Product Description TKR6140B – Locking Shock Rod End and Spring Perch Set (revised, 16mm shocks) Feel confident your vehicle’s suspension will remain consistent over long mains with our new extended length spring perch. These locking...

TKR6146 – Shock Cartridge Set (CNC, Delrin, EB/NB/ET/NT/SCT) Make your Tekno RC shocks even smoother with these precision CNC machined Delrin shock guides. They are a direct replacement for the stock guides on all of your Tekno RC vehicles....

$11.99

$10.79

$19.99

$16.39

(1)
TKR6146B – Shock Cartridge Set (CNC,Delrin,revised,all 16mm Shks TKR6152 – Full Option Shock Kit (122mm, no springs, no pistons)
TKR6146B – Shock Cartridge Set (CNC,Delrin,revised,all 16mm ShksTKR6152 – Full Option Shock Kit (122mm, no springs, no pistons)

TKR6146B – Shock Cartridge Set (CNC, Delrin, revised, all 16mm shocks) This shock cartridge set has been revised from TKR6146 by reducing the height of the bottom guide to allow additional up-travel. This results in better bump handling and...

TKR6152 – Full Option Shock Kit (122mm, no springs, no pistons) Full option shock sets include all the best parts available and allow you to build the best shocks on the market – hands down! Included in the package are hard anodized,...

$19.99

$17.98

$84.99

$72.99

TKR6153 – Full Option Shock Kit (137mm, no springs, no pistons) TKR6159 – Shock Pistons (CNC, flat/tapered, 4×1.8, 10.2mm2)
TKR6153 – Full Option Shock Kit (137mm, no springs, no pistons)TKR6159 – Shock Pistons (CNC, flat/tapered, 4×1.8, 10.2mm2)

TKR6153 – Full Option Shock Kit (137mm, no springs, no pistons) Full option shock sets include all the best parts available and allow you to build the best shocks on the market – hands down! Included in the package are hard anodized,...

TKR6159 – Shock Pistons (CNC, flat/tapered, 4×1.8, 10.2mm2) Made from self lubricating Delrin material utilizing a new tapered shape, these CNC pistons have (4x) 1.8mm holes and are machined to perfection. Total piston hole area is...

$89.99

$76.99

$24.99

$20.48

TKR6160 – Shock Piston Blanks (CNC, flat/tapered,16 dimples,4pcs TKR6162 – Shock Pistons (CNC, flat/tapered, 3×2.1, 10.4mm2, 4pcs
TKR6160 – Shock Piston Blanks (CNC, flat/tapered,16 dimples,4pcsTKR6162 – Shock Pistons (CNC, flat/tapered, 3×2.1, 10.4mm2, 4pcs

TKR6160 – Shock Piston Blanks (CNC, flat/tapered, 16 dimples, 4pcs) Made from self lubricating Delrin material utilizing a new tapered shape, these CNC pistons have 16 dimples for easy drilling and are machined to perfection. For use in all...

TKR6162 – Shock Pistons (CNC, flat/tapered, 3×2.1, 10.4mm2, 4pcs) Another piston option is now available for all Tekno RC vehicles! These pistons excel when used with our NB48.3 and EB48.3 vehicles on bumpy tracks where less pack than...

$24.99

$20.48

$24.99

$20.48

TKR6163 – Shock Piston Blanks (CNC, flat/flat, 16 dimples) TKR8100 – Ackermann Plate (7075, gun metal anodized, EB/NB48.4)
TKR6163 – Shock Piston Blanks (CNC, flat/flat, 16 dimples)TKR8100 – Ackermann Plate (7075, gun metal anodized, EB/NB48.4)

Product Description TKR6163 – Shock Piston Blanks (CNC, flat/flat, 16 dimples) Made from self lubricating Delrin material utilizing a new tapered shape, these CNC pistons have 16 dimples machined to perfection for easy drilling. These can...

Product Description

TKR8100 – Ackermann Plate (7075, gun metal anodized, EB/NB48.4)

NOTE: Requires TKR8104 Bell Cranks and also TKR1403 M3x10 Button Head Screws.

$24.99

$22.49

$9.99

$8.99

TKR8104–Bell Cranks and Top Plates(requires TKR8100, MT, Option TKR8151 – Differential Ring Gear (CNC, 40t, use with TKR8152)
TKR8104–Bell Cranks and Top Plates(requires TKR8100, MT, OptionTKR8151 – Differential Ring Gear (CNC, 40t, use with TKR8152)

TKR8104 – Bell Cranks and Top Plates (requires TKR8100, EB/NB/ET/NT/SCT/MT)

NOTE: Requires TKR8100 Ackermann Plate and also TKR1403 M3x10 Button Head Screws.

Product Description TKR8151 – Differential Ring Gear (CNC, 40t, use with TKR8152) These gears are CNC machined from high quality steel, then hardened for durability. They will provide smoother and more efficient operation than our standard...

$11.99

$10.79

$29.99

$26.99

TKR8152 – Diff Pinion (12t, CNC, use with TKR8151) TKR8702–Shock Caps(7075,emulsion/vented/standard,black ano,2pcs
TKR8152 – Diff Pinion (12t, CNC, use with TKR8151)TKR8702–Shock Caps(7075,emulsion/vented/standard,black ano,2pcs

Product Description TKR8152 – Diff Pinion (12t, CNC, use with TKR8151) These gears are CNC machined from high quality steel, then hardened for durability. They will provide smoother and more efficient operation than our standard gears. They...

Product Description TKR8702 – Shock Caps (7075, emulsion/vented/standard, black ano, 2pcs) One shock cap for standard, vented and emulsion shock building styles! CNC machined from 7075 aluminum and black anodized, Tekno RC’s TKR8702...

$19.99

$17.99

$24.99

$22.49

TKR8725–Emulsion O-Ring Set for TKR8702 shock caps VRP Gamechanger Pistons 6 Hole 1.3mm-Tekno/KYO/Xray 1/8 Hi Pack
TKR8725–Emulsion O-Ring Set for TKR8702 shock capsVRP Gamechanger Pistons 6 Hole 1.3mm-Tekno/KYO/Xray 1/8 Hi Pack

Product Description

TKR8725 – Emulsion O-Ring Set (4x cap seals, 8x emulsion screw o-rings, for TKR8702 shock caps)

Package Includes: (4) emulsion o-rings and (8) small cap screw o-rings.

HIGH PACK Pair of (2) VRP 'Gamechanger' Pistons - 6H1.3mm Important* You will need to use the HB D815 Bellow Baldders. Soak them in Shock oil before running them.

$5.99

$5.39

$32.50

$28.49

VRP Gamechanger Pistons 6 Hole 1.3mm-Tekno/KYO/Xray 1/8 Low Pack VRP Gamechanger Pistons 6 Hole 1.3mm-Tekno/KYO/Xray 1/8 Med Pack
VRP Gamechanger Pistons 6 Hole 1.3mm-Tekno/KYO/Xray 1/8 Low PackVRP Gamechanger Pistons 6 Hole 1.3mm-Tekno/KYO/Xray 1/8 Med Pack

LOW PACK Pair of (2) VRP 'Gamechanger' Pistons - 6H1.3mm Important* You will need to use the HB D815 Bellow Baldders. Soak them in Shock oil before running them.

MED PACK Pair of (2) VRP 'Gamechanger' Pistons - 6H1.3mm Important* You will need to use the HB D815 Bellow Baldders. Soak them in Shock oil before running them. 

$32.50

$28.49

$32.50

$28.49

VRP Gamechanger Pistons 6 Hole 1.6/1.3mm-Tekno/KYO/Xray1/8 High VRP Gamechanger Pistons 6 Hole 1.6/1.3mm-Tekno/KYO/Xray1/8 Low P
VRP Gamechanger Pistons 6 Hole 1.6/1.3mm-Tekno/KYO/Xray1/8 HighVRP Gamechanger Pistons 6 Hole 1.6/1.3mm-Tekno/KYO/Xray1/8 Low P

HIGH PACK Pair of (2) VRP 'Gamechanger' Pistons - 6H1.6/1.3mm For Tekno NB48.3/EB48.3 as tested by Ryan Lutz The (4) Exposed Main Holes are 1.6mm with the (2) Valved Holes at 1.3mm

LOW PACK Pair of (2) VRP 'Gamechanger' Pistons - 6H1.6/1.3mm For Tekno NB48.3/EB48.3 as tested by Ryan Lutz The (4) Exposed Main Holes are 1.6mm with the (2) Valved Holes at 1.3mm

$32.50

$28.49

$32.50

$28.49

VRP Gamechanger Pistons 6 Hole 1.6/1.3mm-Tekno/KYO/Xray1/8 Med P VRP Gamechanger Pistons 8 Hole 1.3mm-Tekno/KYO/Xray 1/8 High Pac
VRP Gamechanger Pistons 6 Hole 1.6/1.3mm-Tekno/KYO/Xray1/8 Med PVRP Gamechanger Pistons 8 Hole 1.3mm-Tekno/KYO/Xray 1/8 High Pac

MED PACK Pair of (2) VRP 'Gamechanger' Pistons - 6H1.6/1.3mm For Tekno NB48.3/EB48.3 as tested by Ryan Lutz The (4) Exposed Main Holes are 1.6mm with the (2) Valved Holes at 1.3mm

HIGH PACK Pair of (2) VRP 'Gamechanger' Pistons - 8H1.3mm Important* You will need to use the HB D815 Bellow Baldders. Soak them in Shock oil before running them. 

$32.50

$28.49

$32.50

$28.49

VRP Gamechanger Pistons 8 Hole 1.3mm-Tekno/KYO/Xray 1/8 Low Pack VRP Gamechanger Pistons 8 Hole 1.3mm-Tekno/KYO/Xray 1/8 MED Pack
VRP Gamechanger Pistons 8 Hole 1.3mm-Tekno/KYO/Xray 1/8 Low PackVRP Gamechanger Pistons 8 Hole 1.3mm-Tekno/KYO/Xray 1/8 MED Pack

LOW PACK Pair of (2) VRP 'Gamechanger' Pistons - 8H1.3mm Important* You will need to use the HB D815 Bellow Baldders. Soak them in Shock oil before running them. 

MED PACK Pair of (2) VRP 'Gamechanger' Pistons - 8H1.3mm Important* You will need to use the HB D815 Bellow Baldders. Soak them in Shock oil before running them. 

$32.50

$28.49

$32.50

$28.49

VRP Pistons XV3 4 Hole 1.9/2.0 Splits for Tekno VRP Pistons XV3 4 Hole 1.9mm for Tekno
VRP Pistons XV3 4 Hole 1.9/2.0 Splits for TeknoVRP Pistons XV3 4 Hole 1.9mm for Tekno

This is a pair of (2) VRP 'XV3' 4 Hole 1.9/2.0 Split for the Tekno. These have been tested by Tekno Team Members. These use the ever popular ‘XV3’ Piston Technology. Simple to understand! The Pistons are designed to increase the...

This is a pair of (2) VRP 'XV3' 4 Hole 1.9 for the Tekno. These have been tested by Tekno Team Members. These use the ever popular ‘XV3’ Piston Technology. Simple to understand! The Pistons are designed to increase the Rebound only....

$17.00

$15.30

$17.00

$15.30

VRP Pistons XV3 4 Hole 2.0mm for Tekno VRP Pistons XV3 4 Hole 2.1mm for Tekno
VRP Pistons XV3 4 Hole 2.0mm for TeknoVRP Pistons XV3 4 Hole 2.1mm for Tekno
This is a pair of (2) VRP 'XV3' 4 Hole 2.0 for the Tekno. These have been tested by Tekno Team Members. These use the ever popular ‘XV3’ Piston Technology. Simple to understand! The Pistons are designed to increase the Rebound only....This is a pair of (2) VRP 'XV3' 4 Hole 2.1 for the Tekno. These have been tested by Tekno Team Members. These use the ever popular ‘XV3’ Piston Technology. Simple to understand! The Pistons are designed to increase the Rebound only....

$17.00

$15.30

$17.00

$15.30