Tekno RC TKR6502 EB410.2 1/10th 4WD Competition Electric Buggy Kit

Tekno RC EB410.2 1/10th 4WD Competition Electric Buggy Kit

10 Review(s) Write a Review

Your Price: $429.99

Retail Price:$699.99

You Save:$270.00(39%)

Tekno RC TKR6502 EB410.2 1/10th 4WD Competition Electric Buggy Kit

Part Number: TKR6502

Availability: Out of Stock.

Description
Customer Reviews
Detailed Description
Instruction Manual
Setup Sheets

Since its 2017 release, the groundbreaking features of the EB410 have propelled the platform to the peak of performance and durability in the 1/10th scale 4wd buggy class. The never before seen weight forward, reverse bell crank design turned heads as it was winning at the highest levels of competition on wide-ranging track surfaces. Its first major title came when Tyler Hooks piloted it to a first-place finish at the 2018 ROAR nationals in the stock 4wd 1/10th class. A few months later, Jared Tebo claimed his first victory at the prestigious 2019 Reedy Race of Champions. Even though it has been extremely successful in the hands of our team drivers and customers, our design engineers weren’t content and knew it could be improved.

Tekno RC is pleased to announce the next evolution in 1/10th scale 4wd buggy is here, the EB410.2. We’ve set the bar in terms of build quality and easy to follow instructions, so expect the same here. Not only have many of the updated components from the ET410 been incorporated, but several all-new elements have been included to further improve handling and durability.

Now included is a front end sway bar system along with new 15-degree low roll center spindle carriers. The suspension has been upgraded with new pistons and revised shock towers. In the rear, we have included new arms that allow front-mounted shocks, new adjustable roll center rear hubs, and a new, taller one-piece wing mount to help improve aerodynamics and roll characteristics. Durability has also been improved with a new spur gear, a front bulkhead brace, heavy-duty ABCD hinge pin braces, and larger 3.5mm inner hinge pins.

We think you will agree, the EB410.2 represents a new level of performance, durability, and value to help you step higher on the podium.

EB410.2 Key Features:

Revised CNC 7075 Long Wear Chassis
New Larger 3.5mm HD Hinge Pins and Revised Hinge Pin Inserts
New ABCD Hinge Pin Braces w/ Revised Suspension Geometry
New Taller, Stronger One Piece Wing Mount w/ Height Adjustments
13mm Big Bore Shocks w/ Revised Cartridge and Cap Bushing
Ultra Secure Locking Spring Perch Design
New Rear Arms w/ Front Mounted Shocks
New Adjustable Roll Center Rear Hubs
New 15 Degree LRC Spindle Carriers
New Aluminum Front Camber Plate w/ Bulkhead Brace
Revised Material 81T Spur Gear
Front and Rear Sway Bars Now Included
Large Wheel Bearings and 6mm HD Stub Axles
Newly Optimized Reverse Bellcrank Steering System

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

View All Reviews - Reset

Sooooo good!

I had driven an original EB410 and thought there was always something missing. I bought this updated version and holy cow! Solid, consistent, and the kit setup is extremely good. I only went down on front diff oil to 10k and added 1/2 degree of front kickup for more steering. I am also using AE offset front wheels with the kit hexes. Everything else is kit. If you are debating this car vs. other choices, just get the Tekno and don't look back.

Did you find this helpful? 3 of 3 Found Helpful

Reviewed by: (Verified Buyer) Victor Hyde from Michigan on 12/15/2019

Awesome Buggy. Great quality.

This has always been one of my favorite kits. Great manual to guide you every step. Great quality, very durable. Awesome drive ability. Love this buggy. I got my items in two days from Rc solutions. Never have had a single complaint when dealing with Pete. Buy with confidence!

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Henderson May from USA on 9/23/2021

TEKNO 410.2

If you don’t own this car you don’t know what you are missing. This thing is built like a tank and has a pile of thought put in to the design. You need one of these and when you get on you need to buy it from FIERCE RC absolutely second to none on price shipping and customer service

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: (Verified Buyer) Michael Studstill from High Springs fl on 12/22/2021

Eb410 2.0

Nice buggy easy to build is good project for anyone I will recommend

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Sergio from Los angeles on 11/6/2021

Tekno eb410.2

Pete hooked me up with the eb410.2 kit and a ton of upgrades. This was the first kit I ever built and all I can say is WOW! Tekno hit it out of the park on this kit. It was probably the most user friendly and detailed instructions of anything I have ever put together. This car is built like a tank!. Pete, thank you so much for taking the time to put this order together over the phone.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: (Verified Buyer) Mitchell Gray from Panama City Beach, FL on 12/23/2020

Chassis

Purpose-built 1/10th scale 4×4 buggy.
Innovative weight forward layout.
New 3mm CNC 7075 aluminum hard anodized lightened chassis with keyed in suspension blocks for improved durability.
Low COG; Electronics and components sunken into chassis.
Integrated battery wire guides.
Ample room for the most popular electronics.
Popular shorty pack configuration. Better balanced and lighter weight
Easy access battery for quick removal and replacement.
Adjustable chassis brace system for fine-tuning rear flex.

Differentials and Drivetrain

Easy access differentials.
Three oversized fluid-filled adjustable lightweight diffs.
Lightened outdrives and diff couplers used throughout.
Tapered aluminum center driveshafts.
Angled rear gearbox with large bearings.
Straight center driveline for maximum efficiency and minimal wear.
High strength metal ring, pinion, and internal diff gears.
CVA drive shafts with bearing captured pins.
Oversized 6mm stub axles with custom serrated and lightened wheel nuts.

Shocks

Smooth 13mm big bore shocks.
Industry-leading COG with compact tower and shock design.
Super durable 10mm front and 8mm rear composite shock towers.
New flat/flat piston design and configuration (Front – 8 x 1.2 mm, Rear – 8 x 1.3 mm).
Fully adjustable long travel suspension geometry maximizes stability and traction while providing superior cornering and on-power steering.
SNew strong 3.5mm polished steel shock shafts.
CNC threaded shock bodies and adjustment nuts.
Composite emulsion shock caps.
Clamping spring perches.
CNC Delrin double shock guide design for true and consistent shaft action.
Double X-Ring o-rings to provide smooth and consistent damping.
Optional springs and sway bars are available.

Suspension and Steering

First in class compact reverse bellcrank design producing consistent steering response.
New rear arms and sway bar mount for front-mounted shocks.
New 15° caster LRC spindle carriers.
Bearing supported bellcrank and ackermann plate.
Adjustable Ackermann and bump-steer (bump in, zero bump, bump out).
Adjustable steering stops for precise steering travel settings.
Adjustable front arm sweep and angle to make the car more stable, or aggressive.
Captured outer front and rear hinge pins.
Front gullwing arms lowering COG.
New adjustable heavy-duty CNC 7075 hinge pin braces.
Long rear sway bar for improved consistency.
New HD 3.5mm inner and 3mm outer hinge pins, polished for smooth action.
New composite hubs with camber link and roll center adjustment.
New C and D blocks for increased precision toe and anti-squat adjustability.
Custom locking kingpin screws.

Motor Mount

2-piece CNC aluminum motor mount with precision gear mesh adjustment.
Split center diff mount for easy maintenance.
New 81t spur gear with improved durability.
Lightweight direct-to-diff mount design.
Uses standard 48 pitch pinion gears.
Includes integrated fan mount.

Other Features

High downforce wing with hole guides included.
New +5mm one-piece wing mount.
Easily adjust anti-squat, rear toe, front arm angle, front arm sweep, roll center, toe, camber, wheelbase, Ackermann, bump steer, suspension geometry out of the box.
Full set of option parts available.
Extremely easy to work on with minimal screw count.
All metric hex hardware.

Specifications

Length: 393mm (without wing) up to 424mm (with wing)
Wheelbase: 283-294mm
Width: 246-250*mm (*optional hubs required)
Weight: 1630 (or less) to 1780g depending upon equipment used
Diff Ratio: F/R – 16/40t, Center – 81t
Battery tray dimensions: 96x47x26mm
Kit/RTR: Kit

Needed to Complete

2/3 channel radio/transmitter
1/10 scale ESC and motor system
High torque steering servo (at least 200oz/in)
48 pitch 17 to 34 tooth pinion
2s shorty LiPo battery (at least 4000mAh)
1/10th scale 4wd buggy tires, wheels & CA glue
Paint for body

Recommended Tools

Nut drivers 5.5mm (TKR1108) and 7.0mm (TKR1109)
Hex drivers 1.5mm, 2.0mm, and 2.5mm
Hobby knife
Needle-nose pliers
Shock tool (TKR1115) OR adjustable (Crescent) wrench (for shock assembly)
4mm turnbuckle wrench (TKR1103) – 5.5/7.0 two-sided wrench (TKR1119)

Tekno RC TKR7202 ET410.2 1/10th 4WD Competition Electric Truggy Kit

Tekno RC ET410.2 1/10th 4WD Competition Electric Truggy Kit

$449.99

Out of Stock.

(8)

Add to Wish List

Add To Cart

Tekno RC TKR9005 EB48 2.2 1/8th 4WD Competition Electric Buggy Kit

Tekno RC EB48 2.2 1/8th 4WD Competition Electric Buggy Kit

$699.99

Out of Stock.

(5)

Add to Wish List

Add To Cart

Tekno RC NT48 2.2 1/8th 4WD Competition Nitro Truggy Kit

$729.99

Out of Stock.

(0)

Add to Wish List

Add To Cart

Tekno RC MT48 2.0 1/8th 4WD Performance Monster Truck Kit

$579.99

Out of Stock.

(0)

Add to Wish List

Add To Cart

Categories

Manufacturer

Tekno RC EB410.2 1/10th 4WD Competition Electric Buggy Kit

Average Customer Ratings

Related Items

Recently Viewed Items

SIGN UP FOR OUR FREE NEWSLETTER