Futaba 4PM Plus Super Response Radio System, No Receiver. Part number FUT4PMP. Futaba 4PM Plus 4-channel super response digital proportional radio system, transmitter only with no receiver.
Futaba 4PM Plus Transmitter - Super Response Digital Proportional RC System W No Receiver
S.Bus servo: This is a special function that allows setting of the parameters of our S.Bus servo whose settings are changed by using PC Link software. In addition to the conventional wired system, it can be set wirelessly in combination with the R334SBS or R334SBS-E.
Steering Mixing:
Smooth cornering is possible by independent left and right steering servo setting.
Brake Mixing for Large Cars (Brake):
Brake mixing of the front and rear wheel of 1/5 gas power cars and other large cars can be adjusted independently.
Gyro Mixing (Gyro Mix):
The sensitivity of Futaba car rate gyros can be adjusted from the T4PM.
4WS Mixing for Crawlers and Other 4WS Type (4WS):
This function can be used with crawlers and other 4WS type vehicles.
Dual ESCs Mixing for Crawler Cars (Dual ESC):
ESCs at the front and rear are controlled independently.
CPS-1 Mixing (CPS Mix):
LED lighting and flashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.
Anti-skid Braking System (Th A.B.S):
This function applies the brakes so that the tires of gas powered cars, etc. do not lose their grip on the road even when braking at corners.
Throttle Acceleration (Accel):
Gas power cars have a time lag before the clutch and brakes become effective. The throttle acceleration function reduces this time lag.
Throttle Speed (Speed):
Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily. It also suppresses battery consumption.
Steering Speed (Speed):
When you sense that the steering servo is too fast, etc., the servo operating speed (direction that suppresses the maximum speed) can be adjusted.
Racing Timer (Timer):
The lap timer can record 100 lap times and total time. The timer can also be started automatically by trigger operation. The race time and audible alarm can be set. Refueling time is indicated by an audible alarm. An up timer is also provided.
Function Select Switch (Switch)/Dial Function (Trim Dial):
This assigns functions to 2 switches and dials (digital trim, digital dial). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.
Trigger Position Can Be Changed:
The position of the throttle trigger can be moved forward and backward.
Tension Adjustment Function:
The tension of the steering wheel and throttle trigger springs can be adjusted from the outside.
Mechanical ATL Adjustment:
Make this adjustment when you want to decrease the total travel of the brake (push) side of the throttle trigger.
Contents
Your 4PM Plus Includes the Following Components:
T4PM Plus Transmitter
No Receiver
Dry Battery Holder
Mini Screwdriver
Transmitter Specs
T-FHSS SR/T-FHSS/S-FHSS System, Wheel Type, 4 Channels
Communication Method:
Bidirectional protocol
Maximum Operating Range:
100m (Except the MiniT system) (Optimum condition)
For Safety:
F/S, B-F/S, ID
Transmitter Frequency:
2.4 GHz band
RF Power Output:
100mW EIRP
Power Requirement:
(Dry Cell Battery) Penlight x 3 (4.5 V)
Current Drain:
150 mA or less
Transmission Antenna:
1/2-wave dipole
Receiver Specs
R304SB
T-FHSS
Size:
35.1 x 23.2 x 8.5 mm
1.38 x 0.91 x 0.33 in
Weight:
6.6 g
Operating Voltage:
DC 4.8-7.4V
